E2EM-X15C2 2M Proximity Sensor
Product Details
Instruction manual
Accessories
Iron zinc plating
Material (toothed washer)
Brass nickel plating
Material (clamping nuts)
PBT
Material (sensing surface)
Brass nickel plating
Material (case)
approx. 195 g
Weight (Packed state)
Pre-wired models (Cable length: 2 m)
Connection method
Not equipped
Applicable standard (CCC mark)
EMI: EN60947-5-2
Emission Enclosure: CISPR11 Group 1 classA
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Burst: IEC61000-4-4
CE marking: Equipped
Applicable standard (EC Directive (EMC Directive))
EN60947-1
EN60947-5-2
Applicable standard (EC Directive (Low Voltage Directive))
IEC60529: IP67
Company standard: Oil-proof
Degree of protection
1000m/s2 for 10 times each in X, Y, and Z directions
Shock resistance
10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Vibration resistance
1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Dielectric strength
50 M OHM Min. at 500VDC between charged parts and the case
Insulation resistance
+-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)
Voltage influence
+-15% Max. of sensing distance in temperature range of -25 to +70CEL
(As the basis for sensing distance of 23CEL)
Temperature influence
Operating: 35 to 95 %RH
Storage: 35 to 95 %RH
(with no condensation)
Ambient humidity
Operating: -25 to 70 CEL
Storage: -40 to 85 CEL
(with no icing or condensation)
Ambient temperature
Standard
Standard or Different frequency
Surge suppressor
Output short-cut protection
Power supply reverce polarity protection
Protective circuit
NC
Operation mode
Operation indicator(yellow)
Indicator
(DC) 2 V Max. (under load current with cable length of 2m)
Control output (Residual voltage)
0 to 200 mA
Control output (Switching capacity)
NPN open collector output
Control output (Output type)
13 mA Max.
Current consumption
10 to 40 VDC
Operating voltage range
12 to 24 VDC (ripple(p-p) :10% Max.)
Power supply voltage
DC: 0.1 kHz (average)
Response frequency
Iron 30*30*1mm
Standard sensing object
Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Sensing object
10% Max. of sensing distance
Differential distance
0 to 12 mm
Setting distance
15 mm -10% to +10%
Sensing distance
Inductive type
Sensing method
M30
Cylinder type sensing head size
Shielded
Shield
RATING AND PORFORMANCE
SPECIFICATION
E2EM-X15C2 2M Proximity Sensor
- Country:China (Mainland)
- telephone:86-022-27457537
|
No-polarity 2-Wire Proximity Sensor with a 30-mm Sensing Distance Detection at up to 30 mm to reduce problems with workpiece c |
Send inquiry / quota request to E2EM-X15C2 2M Proximity Sensor
Relate products of E2EM-X15C2 2M Proximity Sensor
\"Turbine generator parts Sensor Proximity Turbin TM0180-08-00-05-10-02 is offered by Dongfang Yoyik. Dongfang Yoyik Engineering Co., Ltd is a company majored in manufacturing and supplying power unit spare parts. we have experience over two ades of providing high value ...
\"YOYIK® PROXIMITY SENSOR SMCB-01/02 Dongfang Yoyik Engineering Co., Ltd is an industrial supplier based on Deyang, known as the city of heavy industry in China. We are specialized in manufacturing and trading the spare parts of power unit, including filter and filter ...
\"Turbine generator parts PROXIMITY SENSOR NBB20-L2-A2-V1 is a popular product from Yoyik. Dongfang Yoyik Engineering Co., Ltd is a professional supplier of power unit spare parts. We have pneumatic and hydraulic components brands both domestic and overseas. We manufacture ...
