MS -02 - Magnetic Transducer

Construction:
The magnetic transducer is mounted to a fixed foundation
washer with two M10 screws. If the transducer
is assembled to a steel construction, the transducer
must be separated from such construction with a
washer out of non-magnetic material with a minimum
thickness of 3 mm. Maximum distance from magnet
may be 200 mm. Transducer must be protected with a
series fuse with a maximum value of 0,2A. Transducer
is supplied with app. 1,5 m long cable, different length
is acceptable after agreement with the manufacturer,
maximum 30 m. Freely hanging cable that is longer
than one meter must be mounted with a clib near the
transducer. Cable needs to be protected against mechanical
damage. Use only copper conductors for
connecting. For connection of earth conductor and
conductor for mutual bonding use the M6 screw at the
transducer side. Use terminal lug and a conductor
with a minimum cross section of 4 mm2 for connection.
Transducer installation in areas with explosion risk
must be in accordance with the user guide, local operation
regulations, SN EN 60 079-14, SN EN
50 281-1, SN EN 50 281-2 and other valid regulations.
MS - 02 Magnetic Transducer
Technical parameters:
Switching system Polarized contacts in a series
with resistance 15