E2EM-X2C1 2M Proximity Sensor

Instruction manual

Accessories

Iron zinc plating

Material (toothed washer)

Brass nickel plating

Material (clamping nuts)

PBT

Material (sensing surface)

Stainless steel (SUS303)

Material (case)

approx. 65 g

Weight (Packed state)

Pre-wired models (Cable length: 2 m)

Connection method

Not equipped

Applicable standard (CCC mark)

EMI: EN60947-5-2
Emission Enclosure: CISPR11 Group 1 classA
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Burst: IEC61000-4-4
CE marking: Equipped

Applicable standard (EC Directive (EMC Directive))

EN60947-1
EN60947-5-2

Applicable standard (EC Directive (Low Voltage Directive))

IEC60529: IP67
Company standard: Oil-proof

Degree of protection

500m/s2 for 10 times each in X, Y, and Z directions

Shock resistance

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Vibration resistance

1000 VAC 50/60 Hz for 1 minute between charged parts and the case

Dielectric strength

50 M OHM Min. at 500VDC between charged parts and the case

Insulation resistance

+-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)

Voltage influence

+-10% Max. of sensing distance in temperature range of -25 to +70CEL
+-15% Max. of sensing distance in temperature range of -40 to +85CEL
(As the basis for sensing distance of 23CEL)

Temperature influence

Operating: 35 to 95 %RH
Storage: 35 to 95 %RH
(with no condensation)

Ambient humidity

Operating: -40 to 85 CEL
Storage: -40 to 85 CEL
(with no icing or condensation)

Ambient temperature

Standard

Standard or Different frequency

Surge suppressor
Output short-cut protection
Power supply reverce polarity protection

Protective circuit

NO

Operation mode

Operation indicator(yellow)

Indicator

(DC) 2 V Max. (under load current with cable length of 2m)

Control output (Residual voltage)

0 to 200 mA

Control output (Switching capacity)

NPN open collector output

Control output (Output type)

13 mA Max.

Current consumption

10 to 40 VDC

Operating voltage range

12 to 24 VDC (ripple(p-p) :10% Max.)

Power supply voltage

DC: 1.5 kHz (average)

Response frequency

Iron 8*8*1mm

Standard sensing object

Ferrous metal (Sensitivity lowers with non-ferrous metals.)

Sensing object

10% Max. of sensing distance

Differential distance

0 to 1.6 mm

Setting distance

2 mm -10% to +10%

Sensing distance

Inductive type

Sensing method

M8

Cylinder type sensing head size

Shielded

Shield

RATING AND PORFORMANCE

specification

E2EM-X2C1 2M Proximity Sensor

No-polarity 2-Wire Proximity Sensor with a 30-mm Sensing Distance
Detection at up to 30 mm to reduce problems with workpiece