RPS-409A Self Contained Sensor
Product Details
to review the adjustment procedure for the pump up/pump control.
8" to 80"
8" to 80"
4" to 40"
8" to 80"
4" to 40"
8" to 80"
OUTPUT
RANGE
PART NUMBER
The RPS-401,426 is furnished with Hysteresis Control by means of a second potentiometer. This control allows you to adjust the turn-off point while the range control adjusts the turn on point. (Example: Range pot set for 10", Hysteresis pot set for 20". With these settings the sensor will detect when the target reaches 10" and stays on as the target moves away to 20".) This Hysteresis can be adjusted from .5" to 40" from the detect point with the 40" sensor and 1" to 80" with the 80" sensor
Hysteresis Detection
Proximity detection is the detection of an object at a given distance. The detection range of the RPS-401,426 is controlled by the "Range Control" potentiometer. Any object within the desired range is detected, while objects out of range are ignored. The range of the RPS-401 is either 4" to 40" or 8" to 80". The range of the RPS-426 is 8" to 80" only. This means that in the proximity mode the object will be detected from whatever detect point is set to the minimum sensing range of the sensor either 4" or 8". The hysteresis control needs to be off by turning the potentiometer fully counterclockwise.
Proximity Detection
.
Adjustable Detection Point:
4 - 40 inches or 8 - 80 inches
Adjustable Turn Off Point:
0.5 - 40 inches or 1 - 80 inches
Adjustable Detection Point:
4-40 inches or 8-80 inches
The construction of the RPS-401 sensor is Plastic Valox and the RPS-426 is Stainless Steel. A barrel housing is used 30mm in diameter by 100mm in length. For set up purposes an LED indicator is provided. When not detecting the LED will illuminate green and when detecting the LED will illuminate red. The outputs consist of two solid state relays N.O. N.C. which can switch 2-130VAC or VDC up to 100mA DC or 50mA AC continuous. The relay outputs are short circuit protected and isolated up to 1500 volts rms. A standard 6' cable is provided. An optional quick disconnect plug is available.
|
|
The RPS-401 and RPS-426 are self-contained ultrasonic sensors in a 30mm barrel housing, powered by 20-30VDC. A sealed transducer provides protection in hostile environments. The sensor can be operated in two modes a proximity and a hysteresis mode. Operating as proximity sensors and level sensors. The frequency of operation for the RPS-401 is 212kHz for the 4" to 40" range and 150kHz for the 8" to 80"range. The RPS-426 has an 8" to 80" range, and operates at a frequency of 150kHz. These sensors also have built-in short circuit protection for the outputs as well as reverse polarity protection on the input. |
Send inquiry / quota request to RPS-409A Self Contained Sensor
Relate products of RPS-409A Self Contained Sensor
With the continuous development of science and technology, cryogenic storage technology is increasingly used in many fields such as biomedicine, scientific research experiments and industry. Among them, liquid nitrogen supply tanks are widely used in these fields because of ...
In life science research, liquid nitrogen is a commonly used freezing medium, and the container that stores it has become an important experimental tool. During the experiment, in order to stabilize the low-temperature storage environment of the sample, regular replenishment is ...
Theliquid nitrogen level alarmis a monitoring instrument used to sense temperature changes and liquid level heights in various low-temperature liquid nitrogen containers. When the liquid level in the liquid nitrogen tank drops to a certain level, the alarm device will be ...
Come From Tianchi Cryogenic Machinery Equipment Manufacturing
