Lubricant For Marine & Industrial Purpose
Product Details
Thanks & look forward for your valued requirements
Packing :
The material will be packed in leak proof, sealed, M.S.Drums strong enough to withstand rigours of transit and Storage, capacity 200 litres per drum.
Foam Test :
Prepare the fresh water bentonite suspension as in 4(A) (i) and add 0.5% (w/v) of the material stir for 15 min at high speed in Hamilton Beach Mixer and determine the sp. Gravity of the mud
after waiting for 1 min. It should not be less than 0.80.
We are pleased to introduce ourselves as part of Indo Gulf Group.
We Mfg & export
1) OIL FIELD CHEMICALS
2) FINE / LABORATORY CHEMICALS
2) FINE / LABORATORY CHEMICALS
3) METAL TREATMENT CHEMICALS
4) WATER TREATMENT CHEMICALS
5) INDUSTRIAL MAINTENANCE CHEMICALS.
4) WATER TREATMENT CHEMICALS
5) INDUSTRIAL MAINTENANCE CHEMICALS.
6) PHARMACEUTICAL CHEMICALS
Our manufacturing plant, is equipped with state of art process & quality control equipment, an inhouse laboratory which is complimented by a team of gifted Scientists & Chemists.
For the Marine & Industrial purpose we offer the below product
LUBRICANT
Description :
The frictional resistance generated by rotating the drill string against the formation or casing may require extra torque if the hole is crooked or directional, considerable friction resistance to raising and lowering the drill string may also occur. Under certain conditions, such as in highly deviated holesw, holes with different charges in direction, undergauge holes or poor drill string dynamics, increased torque and drag entail a high risk of lost rig time, expensive pipe recovery operations and limitations in well developemnts. Expensive torque required to rotate the pipe generates greater strain on the drill pipe with the danger of twist off.
Sometimes, another problem occurs when drill pipe sticks to the wall of bore hole. This may be caused by running or pulling pipe into the undergauge section of the hole, a key seat or a bridge of caving. Under certain circumstances differential pressure sticking may also occur when the drill pipe becomes motionless against a permiable formation and a portion of the contact area of the pipe is isolated by the filter cake.
To overcome these difficulties, drilling fluids are treated with mud lubricants. Mud lubricants made by Deltamike has following properties.
The frictional resistance generated by rotating the drill string against the formation or casing may require extra torque if the hole is crooked or directional, considerable friction resistance to raising and lowering the drill string may also occur. Under certain conditions, such as in highly deviated holesw, holes with different charges in direction, undergauge holes or poor drill string dynamics, increased torque and drag entail a high risk of lost rig time, expensive pipe recovery operations and limitations in well developemnts. Expensive torque required to rotate the pipe generates greater strain on the drill pipe with the danger of twist off.
Sometimes, another problem occurs when drill pipe sticks to the wall of bore hole. This may be caused by running or pulling pipe into the undergauge section of the hole, a key seat or a bridge of caving. Under certain circumstances differential pressure sticking may also occur when the drill pipe becomes motionless against a permiable formation and a portion of the contact area of the pipe is isolated by the filter cake.
To overcome these difficulties, drilling fluids are treated with mud lubricants. Mud lubricants made by Deltamike has following properties.
Chemical Composition :
Based on vegetable oils, EP additives and mobility
Based on vegetable oils, EP additives and mobility
Specification Of E. P. LUBRICANT :
- Physical State :
Yellow, brown or blackish coloured liquid - Solubility
A. Completely miscible with HSD oil.
B. Immiscible with water. - Density of 30+2
- Country:India
- telephone:91-22-23455220
| Oil & grease remover for Marine & Industrial purpose OILFIELD FINE LABORATORY METAL WATER TREATMENT INDUSTRIAL CHEMICALS. |
