Formula XP-12 Concentrated Metal Conditioner

BENEFITS

  Power Curve Formula XP-12 is exclusively formulated to blend with petroleum and synthetic oils, gear lubes, transmission fluids and grease.  It contains no solids to retard penetration and will not cause any material build up or change even the finest of machine tolerances.  Used in conjunction with Power Curves other fine products, your vehicles engine will perform at peak levels while generating increased cost of fuel savings to you.

  Power Curve Formula XP-12 breaks down this sludge build up so it can be drained during an oil change any oil that comes out clean is not cleaning your engine.  The dirty oil is being deposited as a sludge build up within the engine and, left unchecked, can slow or clog oil returns and create sticky lifters.

  A smooth, oiled surface is more slippery and creates less friction than a non-oiled surface.  The damaging amounts and effects of friction, heat build up and wear are significantly reduced which extends component service life and lessens maintenance costs and down time.  Also, moving parts are further hindered by the build up of sludge, gum and varnish due to oil breakdown or a lack of maintenance.

Power Curve Formula XP-12 is an extreme pressure lubricant that starts where motor oil leaves off, by conditioning and penetrating the metal of your engine, not the oil.  This is accomplished by smoothing the microscopic irregularities, cracks and points of uneven wear on the surface of bearings, pushrods, lifters, and the crank and cam shafts.  All internal moving parts that oil is pumped to is conditioned.

Reduces Wear and Tear in ALL Engines, Diesel and Gas, from up to 30% to 70%. NO SOLIDS! Increases MPG. Reduces Emissions!