XADO Engine Restorer

Note!
Do not change oil until the end of the treatment!

Revitalization is considered to be completed after 1500 km run.

Treatment can be done at idling (4 hours are equivalent to 200 km run); New engines should be treated in one step 2 tubes at one time.

21 - 30 L Oil systems:
9 tubes (9ml), pcs (total 81 ml)| treatment scheme: 3+3+3
New engines: 6 tubes

11-20 L Oil systems:
6 tubes (9ml), pcs (total 54 ml)| treatment scheme: 2+2+2
New engines: 4 tubes

Dosage:
3 - 10 L Oil systems:
3 tubes (9ml), pcs (total 27 ml)| treatment scheme: 1+1+1
New engines: 2 tubes

Step 3
Do as described in Step 2 after 100-250 km run

Step 2
Do as described in Step 1 after 100-250 km run

Step 1
Squeeze out the contents of one tube into the oil mouth of the engine warmed up to the running temperature. (Be careful not to drop tube in crankcase)
Start the engine and let it idle for 5-10 minutes.

Application:
Treatment of the engine with the oil system 3-10 liters.

Technical characteristics
General characteristics of the cermet layer:
Microhardness 750 kg/mm2;
high corrosion resistance;
roughness Ra up to 0,06 mkm.

Advantages

The compound is designed for protection of engine parts against wear and restoring repair of gasoline engines without disassembling. The gel forms a new cermet coating on friction surfaces (the parts grow in volume, restore their original geometry). As a result a renovated unit exceeds the performance level of a new one and will serve you 2-4 times longer.

For wholesalers wanting huge quanties, alll specs included with purchase.

Increase Gas Mileage, Reduce friction. Renew compression