PULSAR LUBE

The innovative Pulsarlube S has a very unique and scientific design. Conventional spring type lubricators contain a ball valve to be able to control the flow rate of the lubricant. Such mechanism makes it very difficult to control the dispensing rate on this type of lubricator. Another fact that applies to spring type lubricators is that the spring constantly pushes down on the lubricant,thereby causing oil separation. When oil separation occurs, gravity allows the oil to drip out from the bottom, leaving only the thickener behind in the lubricator's chamber. Solution Pulsarlube has eliminated these issues that have plagued spring type dispensers for decades with the invention of its innovative Pulsarlube S lubricator. The Pulsarlube S possesses an ingenious new design that contains a spring at the bottom of the lubricator, which in turn pushes the lubricant upward into the lubricator's grease intake orifice, then down a guide sleeve and into the lubrication point.This new paradigm practically eliminates the problem of oil separation because it is pushing up not down. The upward piston movement prevents the possibility of oil from dripping out due to the effect of gravity and maintains the lubricant as a whole within the chamber, thereby preventing hardening of the grease and allowing the lubricator to completely empty out its contents. Conventional spring type lubricators contain a ball valve to be able to control the flow rate of the lubricant. Such dispensing mechanism makes it very difficult to obtain an accurate dispensing rate on this type of lubricator. The Pulsarlube to obtain an accurate dispensing rate on this type of lubricator. The Pulsarlube indicator located on top of the lubricator. This is a much more accurate way to control the flow rate. In addition to the inverted spring load design and flow meter, the Pulsarlube S also contains a "Piston Clamp". This clamp serves as a locking device designed to hold the piston securely in place. The purpose for this is to prevent the spring from exerting constant pressure on the lubricant for extended periods of time; for example during transport or storage, thereby preventing oil separation. This innovative clamp feature allows us to offer our customers the opportunity toreceive a pre-filled lubricator. There is no need for the customer to fill the lubricator during initial purchase; the lubricator is automatically ready for use. There are no other accessories or tools needed for installation, simply place the Pulsarlube S on the lube point. The Pulsarlube S can be used on any type of equipment that contains... ? Ball, Roller Bearing ? Shield Bearing ? Open Bearings NOTE : Please make sure that there is a clear passage into the bearing by cleaning out hardened grease.