Industrial Lubrcant - SPIRIT SYN CH

For further assistance on product MSDS, recommendation or technical queries, please liaise with the regional technical services engineer or contact HQ technical engineers.

Customer Advice

Characteristics  100
 150
 220
 
Viscosity, cSt
   
@40C
 82.6
 143
 198
 
@100C
 16.4
 26.4
 34.8
 
Viscosity Index
 215
 228
 228
 
Pour Point, C
 -45
 -42
 -40
 
Flash Point, COC, C
 280
 255
 295
 
Fire Point, C
 320
 275
 320
 
Specific Gravity, 60F
 1.045
 1.052
 1.067
 
Density, lbs/gal, 60F
 8.7
 8.75
 8.89
 
Copper Strip Corrosion, ASTM
 1B
 1B
 1B
 
Foam Test, Seq 1, ml initial, ml final
 0/0
 0/0
 0/0
 
Total Acid Number, mg KOH/g,
 0.3
 0.00
 0.01
 
Water content, %
 0.05
 0.01
 0.05
 

Product Typicals

* 18 Kgs pails and 180 Kgs drums

Packagings

* Resists wash off by hydrocarbon gases and liquids
* Resists absorption into the gas phase and carry-over of the lubricant downstream
* Minimizes dilution effects due to insolubility of the lubricant with hydrocarbons
* Higher film-strength that traditional lubricants
* Protects against corrosion
* Fully compatible with most compressor component materials, including: seals, gaskets, hoses, etc.

Customer Benefits

* Recommended: Acetone, Alcohol, Asbestos, Butyl Dioxtol, Chlorinated Solvents, Glycol Ether, Neoprene, Epoxy Paint, Silicone Rubber, Toluene, Torlon (AMOCO), Vespal (DuPont), and Viton (DuPont).
* Questionable: Ethylene Glycol, Triethanolamine, and Water.
* Not Recommended: Gasoline, Glycerol, Heptane, Kerosene, Leather, Methanol, and Oil based paint.

Compatibility

* Intended for the cylinder lubrication of hyper compressors and in natural gas re-injection applications.
* May also be used as a cylinder lubricant for reciprocating compressors processing natural gas, carbon dioxide and other gases that require chemical resistance in an ISO 200 viscosity grade.

Applications

Spirit SYN CH SERIES contains no animal fats or saponifiable products that interfere with well-bore treatment products.

Spirit SYN CH SERIES is a synthetic-based lubricant formulated for use in hyper-compressors and natural gas re-injection applications. It features higher film strength than traditional lubricants, protects against corrosion, is fully compatible with most compressor components, and minimizes the effect of H2S concentrations in sour gas.

Synthetic Gas Compressor Lubricant

SPIRIT SYN CH

Synthetic Gas Compressor Lubricant