Compressor Oils

COMPRO provides stronger resistance to oxidation breakdown than leading mineral oil based fluids. Helps reduce sludge and varnish for trouble-free operation and lower maintenance costs due to fewer fluid change-outs. Available in grades 32, 68, 100 and 150.

COMPRO XL-S resists oxidative breakdown better than some leading synthetic PAO based fluids. Provides up to 8,000 hours of continuous service in rotary screw compressors. Available in grades 32, 46, 68, 100 and 150.

COMPRO XL-R is specifically designed for lubrication and cooling of both single and multi-stage reciprocating air compressors. Particularly effective in systems operating at high discharge temperatures and at pressures as high as 6,000 psi. Meets the industry standard (DIN 51506 VDL) for reciprocating compressor fluid. Available in grades 68 and 100.

COMPRO Synthetic is specially designed for compressors operating at very high or lower temperatures or in severe service applications. Formulated from a custom blend of polyalkylene glycol (PAG) and ester fluids, combined with an effective inhibitor package. Available in grades 32 and 46.

COMPRESSOR OIL RP 268 recommended for use in compressing sour, wet or contaminated gas. Provides excellent high-temperature stability. Very good lubricity and wear protection. Minimizes deposit formation.

COMPRESSOR OIL RP 460 recommended for use in compressing sour, wet or contaminated gas. Suited for use in higher-pressure applications. Provides excellent high-temperature stability. Very good lubricity and wear protection. Minimizes deposit formation.

SPX 5000 recommended for compression of light hydrocarbon gases, propane and sweet natural gas. A polyglycol synthetic lubricant resulting in a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.

SPX 700 and 7068 recommended for compression of select hydrocarbon mixtures, sour natural gas and acid gas, use in gas re-injection service and industrial gears and bearings operating under high load and extreme temperatures. Polyglycol synthetic lubricants resulting in a much lower gas solubility than standard mineral oils, which reduces viscosity dilution and greatly improves the separation of lubricant from the process gas.

NGS 1000 excellent in flooded screw compressors handling methane and ethane, where natural gas liquids are not significantly present. A blended combination of hydrotreated and polyalphaolefin base fluids, fortified with corrosion inhibitors, lubricity improvers and antifoam additives.

REFLO 46A & 68A provides exceptional service in ammonia refrigerant systems. With proper change-out procedures, may result in reduced oil carry over and lower fluid consumption. Available in 2 viscosity grades, suitable for 46 and 68 applications.

COMPRO provides stronger resistance to oxidation breakdown than leading mineral oil based fluids