Dry Lubricants

OKS 100 MoS2 Powder, highly refinedReduces friction and wear within a wide temperature range. Also for admixing to plastics, joints, packings to improve sliding properties. OKS 110 / 111* MoS2 Powder, microsizeReduces friction and wear within a wide temperature range, particularly suitable for very plain and micro-finished surfaces. OKS 1300 / 1301* Sliding Film, colourlessDry sliding film with UV-indicator(not with aerosols). Coating of screws for low friction values within little deviations. Against fretting at thread-forming screws and screws made of stainless steel. Suitable for all screw materials. Surface coating for many materials like glass, ceramics, wood and metals to improve sliding properties. Proven as dry lubricant for guide ways of roller shutters and venetian blinds as well as for pivots of sunshade equipment. OKS 1700 Sliding Film for Screws, water-based concentrateDry sliding film with UV-indicator avoids cold-seizing. Especially for galvanized surfaces and screws made of stainless steel to achieve friction-controlled screw assembly. Dilutable with water up to a ratio of 1:5 maximum, depending on requirements on friction value (common dilution ratio 1:2). Corrosion inhibitor avoids rust after drying process. The water-soluble ingredients are biodegradable. The water-insoluble ingredients are neutral to the environment. OKS 500 MoS2 Bonded Coating, heat-curingDry lubricant film (tribocoaing) for maintenance-free permanent lubrication under high load and occasionally occurring slow speed. Especially at places where oil and grease lubrication is not feasible. Fully effective even after longer standstills OKS 510 / 511* MoS2 Bonded Coating, fast-dryingDry lubricant film (tribocoaing) for maintenance-free permanent lubrication under high load and occasionally occurring slow speed. Especially at places where oil and grease lubrication is not feasible. Fully effective even after longer standstills. Also for very low and/or high temperatures. Radiant-resistant and vacuum-stable. Drying at room temperature! Used upcoating can be retouched. OKS 520 MoS2 Bonded Coating, air-dryingDry lubricant film (tribocoaing) for maintenance-free permanent lubrication under high load and occasionally occurring slow speed. Especially at places where oil and grease lubrication is not feasible. Fully effective even after longer standstills. In addition corrosion protection. OKS 522 MoS2/PTFE Bonded Coating, air-dryingVery special tribocoating for maintenance-free permanent lubrication under extreme high load and slow speed in combination with intermittent movements. Especially at places where oil and grease lubrication is not feasible. Fully effective even after longer standstills. Steady low friction value during starting operations. In addition corrosion protection. OKS 530 MoS2 Bonded Coating, water-based, air-dryingDry lubrication film for maintenance-free permanent lubrication under high load and slow speed occuring from case to case. Especially at places where oil and grease lubrication is not feasible. Fully effective even after longer standstills. Layer thickness is adjustable through dilution with water up to a ratio of 1:1 maximum. OKS 536 Graphite Bonded Coating, water-based, air-dryingHigh-temperature and pressure-proof dry lubricant film for temperatures where oil and grease lubrication is not feasible. Can be sprayed onto hot surfaces. Particularly economical as dilutable with water up to a ratio 1:5 maximum. OKS 570 / 571* PTFE Bonded CoatingColourless, nonstaining sliding and separating film with antistick effect under low loads and slow speed. When oil and grease lubrication is not feasible or not wanted. For all metals, plastis, ceramics, wood. Also as separating film for casting resin applications.