Industrial Lubricants : AG703 Machining and Grinding Coolant

Color Amber in concentrate
Pounds / Gallon 8.6
Flash Point, ?F None
pH @ 20:1 dilution Approx. 9.0 (depending on local water pH)

Typical Applications & Recommended Refractometer Readings

Physical Characteristics
Does not contain Nitrites

The AG703 is formulated for superior resistance to bacteria and fungus growth and keeps coolant in service longer without foul odors or slime. Traditional coolant lubricity additives can act as a food for bacteria. AG703 lubricity additives are inherently less of a food for bacteria and fungus. Thus, coolant stays fresh longer and will not irritate operators' hands. The AG703 exhibits the desired corrosion resistance at suggested concentrations.

Longer Sump Life / Improved Additive Packages

The extreme pressure and lubricity additives of AG703 reduce friction and wear on tools, providing machining results and tool protection comparable to soluble oil, even in hard water. The increased tool protection and sump life decreases consumption and downtime. Because the AG703 is a multi-purpose metal processing coolant, inventories are reduced. The AG703 exhibits low residue properties. This allows coolant residues to be welded through with low porosity, weld resistance and minimal smoke. The AG703 also contains low foaming additives which should eliminate the need for additional anti-foam agents.

Longer Tool Life / Saves Production Dollars

AG703 is an oil-free, synthetic solution designed for blanketed use in most metal processing applications on both ferrous and non-ferrous metals. The AG703 lubricity additives exceed traditional synthetic formulations and in some cases directly replace or exceed the performance of soluble (oil based) coolants.

  • Country:United States
  • telephone:1-407-333-3304
Air Mist 2.0 - 3.0
*Your name:
*Your Email:
*To:Avant Garde Technology, Inc.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Industrial Lubricants : AG290 Machining and Grinding Coolant

Physical and Chemical Properties The AG290 is versatile. It covers the wide range of metal machining operations including cutting, grinding, reaming, roll forming, tapping, boring, broaching, and sawing. Depending on the severity of the work being performed, AG290 can be used ...

Come From Avant Garde Technology, Inc.

Industrial Lubricants : AG193 Ferrous Steel Grinding Coolant

Reaming, Tapping, Broaching 5:1 to 10:1 Milling, Drilling, Turning 10:1 to 20:1 Grinding, Diamond Honing 30:1 Recommended Concentration Recommended Concentration AG193 saves production dollars. Increased tool protection and longer sump life decreases consumption and downtime. ...

Come From Avant Garde Technology, Inc.