Warning
Often when a cooling system has overheated and boiled, scale and sludge within the system is dislodged and can easily block the core of a radiator that was previously functioning satisfactorily.
The sludge and scale can then quite easily cause a blockage in the radiator core when the engine is next operated. Always be aware of this possibility. If such a problem occurs the best course of
action is to have the radiator professionally removed and cleaned.
Packaging:
300 ml bottle (12 bottles per carton)
Part No: R50
Caution
All cooling system faults should be thoroughly checked by a mechanic at the first available opportunity.
Application Rates:
Add 1 bottle for every 10 litres of water or part thereof. To protect cooling systems against corrosion and electrolysis use Nulon R45 Ultra Cool Concentrated Radiator Treatment or one of Nulon's
Long Life Coolants.
Directions for Use:
Exercise caution when removing radiator caps.
Release pressure slowly to avoid scalding.
Note: If the cooling system is dirty or restricted, first clean with Nulon R40 Radiator Cleaner.
Nulon R50 is formulated with a base of fibre and fine metallic particles. R50 will not soften or harm seals and hoses. It has no effect on metals, including aluminium, and is safe to use in all radiators. R50 is compatible with all corrosion inhibitor and all other anti-freeze/anti-boil products.
Nulon Radiator Stop Leak is formulated to effectively seal leaks in radiator and heater cores, weeping cylinder head gaskets and to temporarily repair corroded welsh plugs.
Start the engine and turn the heater on Run the engine until normal operating temperature is achieved |
Note: Nulon ESL can also be used to reduce oil leaks in gearboxes (add 50ml per litre of oil). Features: Nulon ESL can be used as an aid to diagnose the overall condition of an engine. Should an engine not respond to an ESL treatment it could be assumed that the engine will ...
Come From Sing Hiap Hin (Brunei)
Benefits: A number of early model V8 cars fitted with power steering boxes suffered premature leaks. This was due to a design fault as the box was located very close to the exhaust manifold. The heat from the exhaust prematurely hardened the seal, which in turn would leak. To ...
Come From Sing Hiap Hin (Brunei)
Recommended Uses: Radiator Flush and Clean is a non-acidic radiator and cooling system cleaner that effectively cleans in one simple 20-minute operation. Many similar products have to be left in the cooling system for several days, which creates the risk of the user either ...
Come From Sing Hiap Hin (Brunei)