CUTTING OIL

Cutting Oils from a TOP brazilian petroleum refinery, with more then 90 years of tradition! We are official sellers and direct with the refinery. 

ExWorks Rio de Janeiro - Brazil
 
 
 H AS 40
 
 High viscosity, straight cutting oil containing animal grease and chlorine and active sulfur-based extreme pressure additives. This type of lubricant and coolant is also named compound sulfochlorinated greasy oil. 
 
 H AS 40 features high extreme pressure properties in wide temperature ranges, moistening and anticorrosive action on machined parts and guideways of machine tools. It has a proper color, allowing the machining operation to be better viewed, It maintains total compatibility with the components (elastomers, lining and paint) of machine tools, with a soft smell that is not aggressive to the operator. There is no vapor or speck formation, even at high-cutting speeds.
 
 APPLICATIONS
 
 General and severe machining operations such as, for instance, gear manufacture and thread-cutting ferrous material, even low machinability ones.
 
 TYPICAL FEATURES:
 
 Density, 20/ 4 ?C 0,8846
 Kinematic Viscosity at 40 ?C, cSt 40,0
 Kinematic Viscosity at 100 ?C, cSt 5,13
 Color, ASTM 4,0
 Welding load kg Four ball 510
 Pour Point, ?C 182
 August/06
 
   
 H C 22
 
 Medium viscosity, straight cutting oil containing animal grease and chlorine-based extreme pressure additives. This type of lubricant and coolant is also named compound chlorinated greasy oil. 
 
 H C 22 does not leave stains on ferrous and non-ferrous metals and especially on copper alloys. It does not cause vapor or specks because of the high cutting speed during operation. It has high anticorrosive and moistening action on the machined parts and guideways of machine tools. It also has a high lubricant effect resulting in less tool wear and better surface finish on the machined parts. This fluid is soft and is not aggressive to the operator, being compatible with the components of the machine tools.
 
 APPLICATIONS
 
 General machining, lathing operations, milling, thread cutting, brushing, gear manufacture, on ferrous and non-ferrous metals, including low-machinability ones.
 
 TYPICAL FEATURES:
 
 Density, 20/ 4 ?C 0,8790
 Kinematic Viscosity at 40 ?C, cSt 23,0
 Kinematic Viscosity at 100 ?C, cSt 4,40
 Color, ASTM 1,0
 Flash Point, ?C VAC 180
 Welding load kg Four ball 250
 Corrosion, 3 hours at 100?C 1 b
 August/06
 
 
   
 H 68
 
 Straight-cutting lubricant oil. Its composition features basic mineral oil and extreme pressure additives, lubricity agent, friction modifier and vapor reducer.
 
 It meets the requirements of several machining operations on ferrous metals of difficult machinability. It ensures a high lubrication level.
 
 APPLICATIONS
 
 Recommended for general machining operations under severe conditions such as, for instance, gear manufacture and thread-cutting ferrous material, even low machinability ones.
 
 TYPICAL FEATURES:
 
 Density, 20/ 4 ?C 0,8660
 Kinematic Viscosity at 40 ?C, cSt 69,00
 Color, ASTM. 2,5
 Flash Point, ?C VAC 230
 Welding load kg Four ball > 460

Cutting Oils from a TOP Brazilian petroleum refinery, with more then 90 years of tradition!