GenLube_2200

GenLube_2200 Vanishing Lubricant , Vanishing Oil and evaporative oil-Light Duty Engineered exclusively for Aluminum, Copper, Copper alloys and Steel Copper/Brass Light duty vanishing oil designed for stamping, Fin Machines, and roll forming on all metals. INTRODUCTION : VANISHING OIL is a LIGHT DUTY solvent based Vanishing Lubricant designed for those applications wherein little oil film is permissible. Vanishing oil 2200 will virtually disappear - at pre-determined intervals - thus completely eliminating need for any further cleaning, degreasing, buffing or polishing prior to shipping in many operations.This product leaves a thin imperceptible film of lubricant that facilitates a clean die release of thin sheet or roll stock. The carrier generally dries in one to four hours. Normally, cleaning is not required after using vanishing lubricant.2200 specifically formulated for use in roll forming and press operations on pre finished and other specialty metals. Gen-Lube 2200is designed for use where a vanishing Lubricant is required. 2200 is a premium quality, high performance, clear, low viscosity metal working fluid. 2200 evaporates readily leaving little or no residual oils for optimum cleanliness during metal working operation, while still providing excellent release properties. 2200s prompt evaporation characteristics results in the manufacture of clean components, which will readily accept welds, allow for adhesion of paint to processed parts and leave virtually no residue to react with other processing chemicals.2200contains select additives to provide optimum lubricity during metal stamping and forming, resulting in extended die life. The product formulation obtains the important balance of proper lubrication during metalworking, yet vanishes from parts in minimal time to avoid delays in the manufacturing process, and minimizing the need for manual cleaning of components. 2200is non-corrosive and non-staining to aluminum, copper, steel and their alloys. Vanishing oil 2200should be used in stamping operations to keep the tools cool and prevent wear. Suitable for ferrous and non ferrous metals Ideal where rapid drying is required Where surfaces are painted with oil paints Burns clean in annealing ovens

Aluminum lubricants