SL 152 FOOD GRADE GREASE

PATHOLOGIST SL-152DIRECTION : FOOD GRADE GREASE IS AN EXCEPTIONALLY FINE, WHITE, LUBRICATING GREASE FORMULATED WITH INGREDIENTS LISTED IN U.S.FOOD AND DRUG ADMINISTRATION ( FDA ) REGUALATION 121. 2553. IT IS AUTHORIZED BY UNITED STATES DEPARTMENT OF AGRICULTURE FOR USE AS A LUBRICANT WITH INCIDENTAL FOOD CONTACT IN FEDERALLY INSPECTED MEAT AND POULTRY PLANT. USE :FOOD GRADE GREASE IS TO BE USED FOR ALL GREASE LUBRICATION LOCATION IN AND AROUND FOOD PROCESSING SND PACKAGING EQUIPMENT. E.P. (EXTREME PRESSURE) USE FOR ALL GREASE LUBRICATION SPOTS ON MACHINERY ROLLING AND SLIDING BEARING CONFIGURATION-BALL ROLLER NEEDLES BRUSHING SLIDES CAMS etc HIGH MELTING POINT 450 OF DROPPING (MELTING)POINT MAKES - THIS GREASE SUITABLEFOR STEAM SERVICE, AUTOCLAVING OVENS. EXCELLENT WATER RESISTANCE RESISTS WATER WASHOUTS, STEAM CLEANING EXCELLENT LOW CAN BE PURMPED AT 0 F. EMPERATURE PUMPABILITY GREASE LUBRICANT FOR BALL BEARING, BRONZE SLEEVE BEARING, CARM, EQUIPMENT IN FOOD CHANNELS, GEARS, NEEDLE, BEARING,ROLLER PROCESSING PLANTS BEARING, SLOTS, SWIVEL JOINTS SPECIFICATION PROPERTIES ( DESCRIPTION) FORM TYPICAL VALUES SOFT GREASE (NLGI # 2)ALUMINURM COMPLEX THICKENED USDA TECH.GREASE OIL WITH ADDITIVE PENETRATION (WORKED, ASTM D 217) 265/295 RUST INHIBITED (ASTM D1 743) PASS E.P. (EXTREME PRESSURE)LUBRICATION TIMKEN OK LOAD (ASTM D2509) 30 # MINIMUM FOUR-BALL WELA LOAD (ASTM D2783) 200 KGS. MINIMUM ANTI WEAR PROPERTIES (ASTM D2266) FOUR BALL 20 KGS 1 Hr ., 1200 RPM, 130O F 0.778 mm. DROPPING POINT (ASTM D5666) 450 F TEXTURE SMOOTH, BUTTERY. WATER RESISTANCE EXCELLENT PUMPABILITY (ASTM D 942) 100 HOURS @ 210 F 5 Lb. MAXIMUM SEPARATION - 50 HOURS @ 210 OF 7 % MAXIMUM HEAT REVERSION EXCELLENT