Saber Synthetic 100:1 Pre-Mix 2-Cycle Oils

Also need a 4-Stroke oil for your hard working high heat small engines? We now have something specific to your needs. AMSOIL SAE30/10W30 Commercial Grade Synthetic.

Typical 2-cycle pre-mix and injector oils can contain as much as 30% solvent. Therefore by reducing the amount of solvent, you are increasing the quality of oil which actually performs the necessary functions of a lubricant. Keep in mind however, proper formulation of the oil is key to achieving the desired performance. This helps explain how AMSOIL ATP can perform at lean mix ratios such as 100:1. It contains extremely low levels of solvent and therefore adds up to 25% more actual lubricating oil to the system.

A note on solvents - The main function of solvent in 2-cycle oils is for fluidity and miscibility. It is added to lower the cold temperature physical properties of an oil. It helps the oil mix better with the fuel and it thins the oil out so the injection system can pump the oil. It can provide some small amount of cleaning performance. It does not produce a lot of smoke.

They save time and prevent problems caused by having several different mix ratios. See our actual cost per gallon chart to see just how economical AMSOIL 100:1 Saber Professional is.
AMSOIL 100:1 works in all equipment. The higher film strength of about 4000 times virtually eliminates metal to metal contact. Lower temperatures, zero carbon buildup, high detergent levels, low odor and emissions makes this a no brainer.

When you use a higher quality oil you simply need less. AMSOIL Saber has a higher film strength of several thousand times which doesn't allow metal to metal contact thus effectively reducing temperatures.

Note from Dealer: I personally have been using and selling this 100:1 since 1997. I own a Lawnboy mower bought used, a Homelite chain saw and a cheap Sears weed eater,  bought in 1997. I have never had one problem. All start up easily even after storage. Being a fill time dealer, I have many lawn professionals using the Saber Professional. They use less product, save money and their equipment lasts years longer than when they used the standard shelf brands.

Saber Professional is "Smokeless"
Saber Outboard is a very low smoke, low odor product
At 100:1, both oils produce 30 percent lower emissions than oils mixed at 50:1
Saber Professional is recommended for ISO-L-EGD applications
One mix ratio for everything eliminates confusion
Both oils are versatile and very good for many applications
Cost effective compared to oils mixed at 50:1 or richer. See Chart
Saber Outboard exhibits low aquatic toxicity
Lean mix ratio prevents plug fouling and exhaust port deposits
You can also order in our new AMSOIL Online Store
 

New AMSOIL Saber Professional (ATP) and Saber Outboard (ATO) Synthetic 2-Cycle Oils are specifically designed for lean mix ratios in pre-mix applications. Saber Professional contains high temperature detergents for small power equipment. Saber Outboard contains lower temperature dispersants for water-cooled outboard motors. Extensive testing shows superior lubricity and cleanliness properties at lean mix ratios of these premium synthetic formulations. It's a two cycle oil for any ratio!