311 Synkool SS semi-syn machining oils

followed:

before dumping watery wastes. For these areas it is suggested the following procedure be

removed from the Synkool SS. In some areas, it is necessary to remove all traces of alkalinity

Before being discharged into the wastewater system, all tramp oils and metal fines should be

facility.

wastewater system is if the wastewater treatment facility is not a primary wastewater treatment

flow of the wastewater from the plant. The only time Synkool SS cannot be discharged into a

Synkool SS is a water waste treatable product that can be safely discharged into the normal

WASTETREATABILITY:

part after machining.

This results in less cleaning of the metal parts and ease of painting or further processing of the

In addition the antifoam additive will not result in any deposition of residues on the workpiece.

overflow.

greater visibility of the workpiece and a vast reduction in maintenance problems due to coolant

Page 3

TD-311

Continued on Next Page

in a sufficient amount of the cutting fluid being available to the tool-workpiece interface,

additive system provides rapid defoaming and a high degree of stability during use. This results

allows the product to exhibit very low foaming characteristics. The non-silicone base antifoam

sumps. Synkool SS contains a highly effective non-silicone base antifoam additive system that

the tool-workpiece interface and in maintenance problems due to metalworking fluid overflow in

operations during use can result in an insufficient amount of the cutting fluid being available at

Excessive foaming of a cutting fluid especially when used in high pressure machining

VERY LOW FOAMING CHARACTERISTICS:

the possibility of Monday Morning Odor.

degradation. This results in long sump life in a properly maintained machine tool and diminishes

All of these factors result in a very biostable coolant that is able to resist extreme biological

growth. This results is less degradation of the fluid during use.

In addition Synkool SSs emulsifier system possesses less susceptibility to attack from bacterial

greater bioresistance to the growth of bacteria and fungus in the coolant sump.

elimination of a potential food source for the growth of bacterial and fungus in the sump and

skimming and removal of the tramp oils from the sumps and reservoirs. This results the

Synkool SS will reject a very high percentage of tramp oil contamination allowing for easy

longer sump life and less worker complaints.

during usage. This means that Synkool SS is less likely to sour and produce odors resulting in

unlike conventional biocides found in conventional soluble cutting fluids is not readily used up

SS to resist bacterial and fungal growth during use. This broad-spectrum anti-microbial agent

Synkool SS contains an effective broad-spectrum anti-microbial agent that allows the Synkool

EXCELLENT BIORESISTANCE and BIOSTABILITY:

soaps, scum, and resins on the machine and the parts.

magnesium ions in hard water up to 400 ppm; thus preventing the formation of hard water

Synkool SSs emulsifier system contains sequestering agents which combat iron, calcium and

able to resist rancidity, a drop in pH and prevention of the rusting of parts, tools, and machinery.

the rust and corrosion inhibitors alkaline reserve during use resulting in the Synkool SS being

Synkool SSs rust and corrosion inhibiting additive package. The emulsifier system enhances

The emulsifier system further complements and enhances the performance characteristics of

Page 2

TD-311

 

action also assists in flushing of the chips and fines away from the cutting area.

break up and dislodge dirt and grit in order to keep the machine and tools clean. This detergent

This emulsifier system also provides a detergent action that allows the Synkool SS the ability to

virtually eliminated.

smoking and misting characteristics that are associated with the use of soluble cutting fluids is

see the workpiece being machined. Further, by being evenly and uniformly dispersed, the

and uniform dispersion results in a transparent emulsion that allows the operator the ability to

the Synkool SS to be evenly and uniformly dispersed throughout the coolant mixture. This even

be mixed with water at varying concentrations. This emulsifier system allows the oil portion of

Synkool SS contains an effective low-foaming emulsifier system that allows the Synkool SS to

 

ADDITIONAL PERFORMANCE FEATURES:

 

welding to the cutting tools, improved surface finish and extended tool life.

greater dimensional accuracy, higher turning speeds and feeds, prevention of the chips from

zone, thus reducing friction between the cutting tool and the workpiece. This in turn results in

cooling and extreme pressure/lubricity properties effectively transfers heat away from the cutting

the coefficient of friction between the tool and the workpiece interface. This combination of

synthetic lubricity and anti-weld additives that function as extreme pressure agents that reduce

a protective film for lubricating the tool and the workpiece interface. Synkool SS also contains

which enable the fluid to wet the metal surfaces of the tool and the workpiece in order to provide

needed for high speed machining operations. Synkool SS contains surface-active ingredients,

Synkool SS possesses excellent cooling, extreme pressure, and lubricity properties that are

EXCELLENT COOLING AND LUBRICITY

 

use of high-pressure machines.

Synkool SS is especially recommended for use in metalworking fluid operations that employ the

contain any active sulfur, chlorine, nitrites, phenols, Diethanolamine (DEA) or heavy metals.

duty machining operations on both ferrous and non-ferrous metals. Synkool SS does not

metalworking fluid that is recommended for use in grinding and other high speed light to heavy

Synkool SS is a concentrated water-soluble semi-synthetic, biostable, low foaming non-staining

 

DESCRIPTION:

 

#311 SYNKOOL SS

Synkool SS is a concentrated water-soluble semi-synthetic, biostable, low foaming non-staining
metalworking fluid that is recom