Royco 27 Lubricants



Royco and all associated logo's are registered trademarks of Anderol Inc.
 Distributed by QCLubricants, Inc. All Rights Reserved.


Call us for pricing and availability, or with any questions. Our dedicated staff is eager to hear from  you.

 

The synthetic oils used in ROYCO 27 may soften natural rubbers, neoprene, some types of electrical insulating compounds, and certain paints.

 

ROYCO 27 meets all requirements and is qualified against MILSPEC: MIL-PRF-23827C.

 

APPROVALS:

Designed for high loads and high speed bearings Wide operating temperature range Rust and corrosion protection Thermal and oxidative resistance

 

ADVANTAGES:

ROYCO 27 is intended for use in highly loaded gears and actuators as well as instruments and high-speed bearings over temperatures from -100 to 275oF. In addition, ROYCO 27 may be used in all applications where , , , , and are specified.

 

APPLICATIONS:

PROPERTIES

Penetration, mm
Worked
Unworked
Stability, 100,000 strokes
Evaporation, 100 deg C/22 hrs.,%
Storage Stability
Oxidation Stability, 100 hrs, 210 deg. F
Rust Prevention
Dropping Point, deg C
Oil Separation
100 deg C, 72 hrs, % wt
Load Wear Index
Low Temp. Torque, Nm, -100 F
Starting
Running
ROYCO 27

287
275
310
1.0
No Gross Separation
2 PSI
PASS
190

2.3
37

0.38
0.03

TYPICAL PROPERTIES:

 

ROYCO 27 is a light tan colored synthetic ester based grease with a lithium stearate thickener. Additives are provided for oxidation and corrosion resistance as well as rust protection and extreme pressure anti-wear properties.

GENERAL INFORMATION

 

AIRCRAFT GREASE

ADVANCED SYNTHETIC MULTI-PURPOSE

  • Country:United States
  • telephone:1-570-754-7168
ROYCO 27
AIRCRAFT GREASE
*Your name:
*Your Email:
*To:QC Lubricants, Inc.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Royco 46 Lubricants

Give us a call for information, pricing and availability. Our dedicated staff is eager to hear from you. ROYCO 46 meets all requirements and is qualified against MILSPEC: MIL-L-46000 (LSA) APPROVALS: Wide operating temperature range Prevents wear from metal-to-metal contact ...

Come From QC Lubricants, Inc.

Royco 308CA Lubricants

ROYCO 308CA is not recommended as a lubricant at temperatures below -70oF. For operation at extreme low temperatures ROYCO 363 is advised. COMPATABILITY ROYCO 308CA meets all requirements and is qualified to Federal Specification: MIL-PRF-32033, which supersedes and replaces ...

Come From QC Lubricants, Inc.