AMSOIL GH Lithium Complex Grease is compatible with many other types of grease. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of the GL grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Any grease compatibility questions should be referred to your AMSOIL representative or AMSOIL INC.
The correct consistency grade of AMSOIL GH EP Moly Greases are recommended for use in heavy and light duty applications found in manufacturing plants, automotive applications, agricultural equipment and construction equipment. These include, but are not limited to, roller bearings, plain bearings, gears, bushings, thrust bearings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, steering knuckles, and heavily loaded pivot pins on mining and off road equipment such as power shovels, draglines, wheel and back hoe loaders, excavators and bulldozers. AMSOIL GH greases are suitable for use up to 325? F. When operating at elevated temperatures, frequent regreasing may be required.
AMSOIL GH Greases in grades #1 and #2 are recommended for use in manual or automatic lubricating systems. NLGI #1 (GHB) greases have better mobility and are the preferred choice for colder applications, for automatic lubrication systems with long pumping runs, and for gear box applications (where recommended by manufacturer). NLGI #2 (GHD) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, high water environments, and is the primary choice for wheel bearings.
APPLICATION RECOMMENDATION
PERFORMANCE FEATURES
AMSOIL's top performing lithium complex thickener system provides excellent water resistance as identified by the ASTM D-1264 water washout test. Therefore, even in wet conditions a lubricant film remains present to protect equipment against wear while the corrosion inhibitors prevent rust. AMSOIL GHD grease adheres to metal and is shear stable during severe mechanical activity. These features mean the grease does not thin during operation, but rather it maintains its consistency and stays in place to provide good lubrication.
The presence of moly provides an extra measure of protection in shock loading situations common in both construction and agricultural use. During heavy shock loading, the lubricant film between metal surfaces can be temporarily ruptured, but moly remains intact to prevent metal to metal contact which could cause equipment damage. Moly also assists in dirty environments or when proper re-greasing intervals are not followed.
AMSOIL GHD Extreme Pressure grease is qualified against the highest grease standard, NLGI GC (wheel bearing) and LB (chassis), and is designed for heavy duty applications. This grease is composed of synthetic base oils and lithium-complex thickeners that provide the film strength, shear resistance, and mechanical stability critical to high load protection. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. The GHD Grease is compounded with oxidation and corrosion inhibitors, effective oil soluble EP additives and molybdenum disulfide (moly) solid EP additives for all around protection in severe conditions.
PRODUCT DESCRIPTION
Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles and other components operating in high-load, low-speed conditions.
NLGI #1 and #2 (Lithium Complex - Moly Fortified)
AMSOIL Synthetic GH Series Heavy-Duty EP Grease
AMSOIL Synthetic GH Series Heavy-Duty EP Grease |
Grease spray gun A grease spray gun is a tool used for lubrication. It is used to apply lubricant through an aperture to a specific point. There are several common grease industrial spray gun types such as guns made using a lever, hand pump, pistol grip, and an air-powered or ...
Come From TAIZHOU TOOL-BAR MACHINERY CO.,LTD.
7CF® aerosol grease spray for car is lithium grease with an advanced corrosion-resistant, excellent water and heat resistance for providing long lasting lubrication and protection. Ideal for metaltometal, metal to plastic, plastic to plastic lubrication. Aerosol grease spray ...
Come From Shenzhen Sunrise New Energy Co.,Ltd.
7CF® aerosol grease spray is lithium grease with an advanced corrosion-resistant, excellent water and heat resistance for providing long lasting lubrication and protection. Ideal for metaltometal, metal to plastic, plastic to plastic lubrication. Aerosol grease spray is ...
Come From Shenzhen Sunrise New Energy Co.,Ltd.