INDUSTRIAL GEAR OILS--VELLOPOWER EP

Rust Prevention                   Pass  Pass   Pass   Pass  Pass   Pass   Pass    Pass     Pass

Timken OK Load, lb.            65       65     65       65      65      65     65       65       65

Falsh point,COC, ^oC           215     220     230    235    240    245    270    280     280

Viscosity Index,                    90       90       90      90      90      90      90      90         90

                               105     120     155    180   230     330    480    700     1030

Kin. Vis.Cst @ 40 ⁰C       95-     110-   145-   170-  210-   315-   440-  660-      980  

Spcific Gravity                                        0.86 to 0.91

Appearance                                 Bright, clear, homogeneous liquid

Typical Specifications

VELLOPOWER- EP

Vellopower EP  lubricant  220  &  320  can  be  used  for  slower  speed gears in the 200-2500 FPM  speed  range,  and worm gears having rubbing speeds in the range 0-2000 FPM. Vellopower  EP  lubricant  460 is recommended for slow heavily loaded worm, spur and helical  gears  where  exceptional  adhesiveness  is  required  and  where shock loading  may be problem.

Vellopower EP  lubricant  150  can  be  used  in  helical  &  spur  gear  sets  having  peripheral  speeds  of 1000/2500 feet per minute & utilizing  spray or  splash     lubrication. Again it can be used for heavily loaded bearings requiring an oil of this type. This grade has an extremely good record of satisfactory lubrication of main pinion gears in rolling mills in the steel industry.

Vellopower  EP  lubricants 100  are  recommended  for  high  speed  single  & double  helical  gear  sets  utilizing a circulating system for spray lubrication. They are also   suitable   for   heavily   loaded   bearings   where   straight   mineral  oil do  not  have sufficiently  high  film  strength  to  provide  effective  lubrication.

These  are   range  of  high  quality  gear  oils  manufactured  from  selected  Base  stocks & blended  with ashless extreme  pressure  agents.   In addition they contain additives to increase adhesiveness & present film rupture under shock loading conditions. Contains friction modifier. They are very stable, have high resistance to foaming, good demulsibility characteristics, seal compitable & fluidity at   low   temperature.

(Available in ISO viscosity grades of 100, 150, 220, 257, 270, 320, 460, 680 & 1000)