Solar Charger

5 If the light doesnt work when you set the switch on the LED end,it may probably because of the lower voltage of internal battery charge up the lower voltage of internal battery,it will soon get back to normal.

the CH end,it may be because the protection circuit has cut the circuit in view of the lower voltage of internal battery

4 If the LED2 doesnt work although you have set the switch on

To charge up cell phone,that means the operation will be accomplished soon

3 If the LED2 twinkle in green when you use the internal battery

2 the solar charger TS-SC-03 makes slight noise is normal phenomenon when you use the internal battery to charge up cellphone

Battery,please refer to the second method of applications

Changing to charge up cell phone with the internal storage

Phone with the photocell,that issues form the,Voltage of internal storage charger on the low side,You can solve it buy

1 Sometimes LED1 may twinkle in red when you charge up cell

FAQ

(9)  When the built-in battery discharges,the protective circuit cuts off the discharging switch,so the handset can not recharge itself.In this case, the built-in battery has to be recharged to make itself normally operate.

(8)  This charger has the direct current charger,if need the inside the storage battery meet an emergency to refresh,need to connect the direct current charger gone together with to the 110V240V AC power,insert the output direct current power supply into the solar cell opponent machine to refresh the electric outlet directly,the inside places at this time the storage battery will get the fast charge

(7)  This charger inside places the storage battery have refreshed to the saturated capacity when leave factory As time went by, the battery capacity will be reduced.In the 25 environment for 30 days,the residual capacity

solar products
Wattage1.45WVoltage4.8V (max)
Charging current300mA (max)
Power capacity1600mAh
Peak Output400mAmps5.2volts