(SAN) pressure solar collector

Any request for more information will receive my immediate attention.

7.Max working pressure:0.6 Mpa

6.Usual installation angle: 45, 0, 90,can be customized,suitable for balcony, flat roof, slope roof, wall, platform, ground etc.

5.Seal material: Stabilized high temperature silicon rubber

4.Insulation: Polyurethane foam

3.Frame material: Quality aluminium alloy/ SUS304 stainless steel

2.Heat pipe material: TU2 copper

1.manifold casting material: TP2 copper

General description:

5.If the temperature of storage tank does not reach eough temperature, then start auxiliary heating device.

4.If the temperature of circulation pump does not reach the set value, the circulation pump will not be started.

3.The heat-conducting liquid transfer heat to water flow in manifold so that water can be heated.

2.The circulation pump makes heat-conducting liquid circulate automatically

1.When the temperature of solar collector reach set value, the controller shall start circulation pump automatically.

Working principle:

7.Multi-function for bathing, washing ,cooking, etc.

6.A entire set of split solar water heater consists with solar collector, storage tank, working station and installation parts.

5.Differ from common tanks insulation, besides polyurethane foam, the insulation of solar collector has asbestos layer more which wraps the manifold. This technology makes the temperature preservation superior.

4.No water inside tubes when the collector works, and the controller for collector has anti-freezing function. Circulation pump is operated when it reached fixed temperature.

3.The pipe is made of red copper and conducted by heat transfer medium liquid, water can not flow in the vacuum tubes.

2.Collector separates with the storage tank, the tank can be put anywhere of the house

1.The product uses super heat conduction pipe and has a good effect of heat exchange

Feature

pressure solar collector

pressure solar collector,CE,ISO9001,Solar Keymark