solar water heater collectors

Features:
1) Reliable and efficient twin-glass solar tubes;
2) Copper heat pipes for rapid heat transfer;
3) Easy plug-in installation;
4) Free maintenance;
5) Suitable for mains pressure water (up to 8 bar/116psi);
6) Corrosion resistant silver brazed copper header;
7) Aluminum frame;
8) Powder coated (black, brown or silver) aluminum casing;
9) Stable solar conversion during the day;
10) The perfect solar collector for domestic solar water heater systems;
11) Ideal for commercial solar water heating applications.
How it works:
1) The operation of the solar collector is very simple.
2) Solar absorption: Solar radiation is absorbed by the solar tubes and converted into heat.
3) Solar heat transfer: Heat pipes conduct the heat from within the solar tube up to the header pipe
4) Solar energy storage: Water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header, the temperatures is raised by 5-10oC. Throughout the day, the water in the tank is gradually heated.
Technical Specification:
Manifold Casing Material Aluminum/ SUS304 Stainless Steel
Frame Material Aluminum/ SUS304 Stainless Steel
Header Pipe Material Copper
Heat Pipe Material Copper
Insulation Rock Wool
Rubber Seals and Rings UV Stabilized High Temperature Silicon Rubber
Test Pressure 9 bar
Collector Mounting Flat Roof/Inclined Roof
Mounting Angle 15-50
Inlet 3/4

It can withstand a standard pressure of 1.0Mpa

This solar collector can be used for your water tank and swimming pool, it can be placed on the roof or balcony of  your house, even in your garden if you like.

Three target vacuum tube, tube size:58*1800mm

Manifold is made of aluminum with thickness of 2.0mm

Aluminum frame with thickness of  2.0mm for both flat and slope roof use

This products consists of vacuum tube with heat pipe, manifold and frame

Pressurized solar collector, Heat pipe solar collector