(SAN) solar energy collector

Instant hotline: 0086-13505738403

12. To serve Europe, America, Africa clients better, online at Europe work time.

11. OEM,ODM offered.

10. Lead time: 5-7 days for a 20ft container, 10-15 days for a 40ft container

9. CE, ISO9001, CCC, EN12975 approved

8. An individual tubes breakage can not influence normal working of while system.

7. Multi-function for bathing, washing ,cooking, etc.

6. A entire set of split solar water heater consists with solar collector, storage tank, working station and installation parts.

5. Differ from common tanks insulation, besides polyurethane foam, the insulation of solar collector has aluminium silicate fiber layer which wraps the manifold. This technology makes the temperature preservation superior.

4. No water inside tubes when the collector works, and the controller for collector has anti-freezing function. Circulation pump is operated when it reached fixed temperature.

3. The pipe is made of red copper and conducted by heat transfer medium fluid, water does not flow in the vacuum tubes.

2. Collector separates with the storage tank, the tank can be put anywhere of the house

1. The product uses super heat conduction pipe and has a good effect of heat exchange, better than barely vacuum tubes.

Feature:

10. Lifesspan: 15-20 years, warranty 5 years

9. Color: black, silver, or customized

8. Working temperature: -40~350 degree centigrade

7. Working pressure:0.6 Mpa

6. Usual installation angle: 45, 0, 90,can be customized,suitable for balcony, flat roof, sloping roof, wall, platform, ground etc.

5. Seal material: Stabilized high temperature silicon rubber

4. Insulation: Integral polyurethane foam

3. Heat pipe tube in a collector: 10-30 pcs

2. Frame material: Quality aluminium alloy/ SUS304 stainless steel

1. Manifold casting material: TP2 red copper, heat pipe material: TU2 red copper

Specification:

The heat pipe solar collector are connected with existing water heating device. The selective coating on the inner cover of vacuum tube absorbs solar energy and transfer heat to heat pipe by aluminium fins, the medium in heat pipe changes into air and rise to condenser. Then heat pass through heat exchanger and meanwhile, vapour becomes liquid and go back to bottom of heat pipe. Continuous water heating in pipeline is based on the circulation of this heat transfer process.

Work principle:

solar energy collector

Anti-freezing,resist wind and hail well
CE,ISO9001,solar keymark
24 hours automatic water supply
Indirect run,clean water