solar collector(heat pipe)

Hail resistance: 25mm

Minimum/maximum collector angle: 15/70 degrees

Collector flat roof or inclined roof

Three high vacuum tube and inclined roof

Seal: stabilized high temperature silicon rubber

Frame: SUS201 stainless steel

Heat pipe: copper

insulation: rock wool

Header pipe: copper

Outer manifold: stainless steel SUS304

Materials:

1. the test pressure reach to 1.2 MPa, can be connected directly with city tap water.
2. No water inside the evacuated tubes, the system can still in service even with several tubes breakage.
3. Can be used all year round in the cold climate.

advantages

Heat pipe series
Evacuated tubes convert solar energy into heat energy, that is transferred to U pipe by an aluminum fin with high solar energy absorption and low heat radiance loss,Liquid (antifreezing liquid or water) in the Upipe heats up,and the U pipe conducts thermal energy to the water inside the storage tank ditectly (or through internal copper coil),With a testing pressure of 1.2 MPa, Working pressure is 0.6MPa

Key Specifications/Special Features:

Outer manifold: stainless steel SUS304
Header pipe: copper
Insulation: rock wool
Heat pipe: copper
Frame: SUS201 stainless