Heat pipe solar collector(Stainless steel )

1)Heat pipe has its special principle and function, and no water in the pipe. If one of the pipe is broken, the heat collector still could be used normally.
2) solar collector is designed with pressure up to 0.6Mpa.-0.8Mpa
3) Easy to use, also convenient to install
4) Can be put in the courtyard, on the roof or balcony
5) Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly
6)Efficiency: The advantage of solar tubes is that insulate the inner tube from heat loss. This means that once heat is absorbed, it is transferred to the water in the manifold, and not lost to the outside environment. This is the key difference between solar tubes and flat plate solar collectors: the insulative properties. Combined with heat transfer efficiency of the heat pipe, the collector can deliver excellent heat output all year round.

The heat pipe series solar collector are always connected with existing heating supply device.
The selective coating on the inner cover of the evacuated tubes converts solar energy into heat
energy and transfers heat to the heat pipes by aluminium fins. The liquid in the heat pipe changes
into vapour which rises to the condenser. The heat then passes through the heat exchanger and the vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat
transfer liquid (anti-freezing liquid or water) via a copper pipe. This transference of heat into the
liquid creates a continuous circulation as long as the collector is heated by the sun.

The series is solar collector with stainless steel manifold and stainless steel bracket.