heat pipe solar collector

Module design, easy combination.

Withstanding high pressure in operation;

Strong aluminum alloy manifold mould with air-flow design, better wind resistant;

No water flowing inside the vacuum tube, more resistant to low temperature;

Heat pipe made of red copper and heat is conducted via medium liquid;

Higher heat efficiency, the temperature at the condenser could be as high as 250^oC

*Features:

Even though the heat pipe is a vacuum and the boiling point of the medium liquid has been reduced to only 25-30^oC, the freezing point is still the same as water at sea level, that is 0^oC. Because the heat pipe is located within the evacuated tube, brief overnight temperatures as low as -30^oCwill not cause the heat pipe to freeze.

* Working principle::
Heat Pipe solar collector consists of a vacuum tube and a copper heat pipe inside. The vacuum is placed in an inclined mode. When heated, the medium liquid in the heat pipe changes into vapor, which rises to the condenser. When passing through the heat exchanger, the heat is absorbed and the temperature is lowered, then the vapor becomes liquid and returns to the base of the heat pipe. This transference of heat is a continuous circulation as long as the collector is heated by the sun.

module design for solar hot water project