pressure solar collector

10. Manifold (interior): Red copper
11. Manifold (exterior): Aluminum alloy

pressure solar collector:

1. The heat pipe system consists of the glass evacuated tube and a copper heat pipe which is installed within the glass tube.
2. The copper heat pipe conducts heat from within the evacuated tube to its tip (condenser) which is plugged into the header pipe contained in the manifold.
3. As water runs through the header pipe heat is transferred from the heat pipe condenser to the water.

Solar thermal collector specifications:
1. Quantity of tube: 10/12/15/18/20/22/25/28/30/36/40PCS
2. Absorber Area: 1.95 m2-4.26m2
3. Daily output: 110-300L
4. Manifold: Aluminum Alloy with plastic coated with 1.5mm
5. Pipeline: Material: Red copper; Diameter: 35mm; Thickness: 1.0mm
6. Copper pipe: TP2 copper; Diameter: 8mm;
Thickness: 0.6mm
7. Heat preservation Layer: Polyurethane integral foaming with 40mm
8. Support frame: Aluminum alloy \ hot zincification steel with 1.5mm
9. Work pressure: 0.6Mpa

pressure solar collector
1. Quantity of tube: 12/15/18/20//24/30/36/40PCS
2. Daily output: 110-300L