solar collector

    Pump station : Include Wilo RS 15/6 circulation pump , water flow meter, water pressure meter,safety valve, SPC-2 controller and 6L expansion tank

                                         Magnesium : 3/4''

                                         Electric heating : 1.5KW to 3KW , China plug or Europe plug or America plug as you required

                                         Inlet and outlet : 3/4 or 1'' or as you required

                                         Insulation : 55mm Polyrathane foam

                                         Outer tank : 0.4mm SUS304 2B stainless steel or 0.5mm Zinc Coated colour steel

  Storage tank information :  Inner tank 1.2mm SUS304 2B stainless steel

5.A whole set include the solar manifold, storage tank, and a pump station .

4.This system is Solar Keymark certified

3.High efficiency: Use SC high efficiency tube, 3 layers coating tubes, the highest temperature is 360.C

2.Indirect heat, no water goes through the tube. Use heatpipe,  inside the heatpipe, we use anti-freeze and low vaporize liquid. The heatpipe can anti-freeze -40.C, which has been tested in Sweden and Russia. The anti-freeze liquid will get vaporized at degree at 25.C , heatpipe header can get degree of 360.C

1.Heatpipe solar water heater, seperate system ,include storage tank, pump station, Solar Keymark certified, high efficiency

Heatpipe solar water heater, seperate system ,include storage tank, pump station, Solar Keymark certified, high efficiency