solar controller SDPC-10IP for solar street lights two lamps

Compliance CE

Warranty 12 Months

Enclosure IP22

Temperature 35 to 55 centigrade.

Self-consumption 6mA maximum

Dimension 140*90.5mm

Weights 250g

Terminals For wire sizes to 4mm?

Tropicalization Conformal coated printed circuit board

Limits high voltage to protect loads. Lighting protection.

Reverse current through panels at night.

Reverse polarity-solar, load, battery.

Electronic protection includes overload, load short circuit and over current from solar panel.

4 Stages: equalization, PWM, Boost and Float, Temperature compensated charging.

Type of Charging: Series, PWM & stat of charge (SOC)

Micro-controller digital accuracy

Low voltage Reconnect 12.6 Volts (for 24v, use 2X)

Low voltage Disconnect 11.1V Volts (for 24v, use 2X)

Regulation point 14.4 Volts (for 24v, use 2X)

Note: All printed Voltages are only for 12V system. Double voltages for 24 Volt systems.

TECHNICAL INFORMATION

CE,ISO9001

Operation: easy to operate, robust in design.

Controller  accuracy,  stability  and  reliability  is  assured  by  the  use  of  flash  memory  for all  control parameters and set-points.

No adjustable hardware:

Operating temperature range from -35 to +50 deg C.

Design standard:

Digital LED display number equal to time setting

Indicating  LEDs,  monitor  battery  charging  levels  as  well  as  battery  state.  LED monitoring  of  load conditions such as over load and short circuit as well as load on/off, are also provided.

LED indication on system condition:

panel is blocked. Batteries are prevented from over-charging or discharging.

Built in Transient Voltage Suppression protects against lightning. Reverse current leakage through PV

Circuit protection: protection against overload, short circuit and reverse connection,

Over-discharging control voltage modified by the battery discharging rate curve.

High accuracy discharging control:

Charging mode: Pulse Width Modulated control, allows for   high efficiency boost, recovery and float charging. Temperature compensation ensures that these parameters are adjusted for maximum battery condition and hence, prolonged battery life.

Control: Micro Controller Unit utilizing dedicated software for precise control.

Detects days and nights based on solar panel array,light + time control

Solar Controller,solar regulator,solar charge controller
for double lamps,light+time control.