Blue Sky Charge Controller Solar Boost 3024iL&3024DiL

 

-40 to +40C, 10 90% RH non-condensing

 

Environmental

ETL Listed to UL STD. 1741, Certified to CAN/CSA STD. E335-1/2E, CE labeled, FCC part 15 certified

 

Approvals

Blue Sky Energys proprietary IPN Network interface

Communication

Battery & Aux. Battery voltmeters, 40.0VDC 0.50% FS PV voltmeter, 60.0VDC 0.50% FS

Accuracy / Range

 

Analog Input

6 7/8H x 6 5/8 W x 3 3/8D (17.4cm x 16.8cm x 8.59cm)

 

Cabinet Dimension

 

97% Typical @ 28 Volt 24 Amp Output

Power Conversion Efficiency

-5.00 mV/C/cell correction factor (Range -0.00 to -8.00 mV/C/cell ) sensor range -60 to +80C

Optional sensor adjusts charge voltage based on measured battery temperature,

Temperature Compensation

Variable Post-Dusk and Pre-Dawn timers , Range 0.5 - 20.0 Hours

20 Amp maximum; ON @ 12.6VDC / OFF @ 11.5VDC (Range 10.0 40.0VDC , or net battery amp-hours )

2 Amp typical, same charge voltage as primary battery

Single output field configurable as either: 20 Amp load controller or 2 Amp auxiliary battery charger

   

Dusk-to-Dawn Cntrl

    

Load Control

 

  

Aux. Battery charge

 

 

Auxiliary Output Function

15.2VDC (range 10.0 40.0VDC ) automatic or manual operation

Equalization Voltage

13.2VDC (range 13.2 13.8VDC , 10.0 40.0VDC )

Float Voltage

14.4VDC (range 14.0 14.8VDC , 10.0 40.0VDC )

Acceptance Voltage

3-stage Bulk/Acceptance/Float Plus Equalize

Charge Algorithm

0.35W Typical standby 1.0W Typical charge on

Power Consumption

57VDC maximum

 

PV Input Voltage

12 / 24VDC

Nominal Battery Voltage

30 Amp @ 24 Volts / 40 Amp @ 12 Volts

 

Output Current Rating

Solar Boost 3024iL

SPECIFICATIONS   Blue Sky Energys advanced Integrated PowerNet, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special communication hardware to operate. The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control. Solar Boost 3024iLs advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energys advanced IPN network interface are also included. Patented Maximum Power Point Tracking technology allows Solar Boost 3024iL to increase charge current up to 30% or more compared to conventional charge controllers. Dont waste your money by throwing PV power away! 12V / 24V MPPT charge controller