solar controller

12.  smart combination : can be used alone, but also the composition of complementary wind and solar, control inverter integration models.

11.  With a temperature compensation function..

10.  Warning: overvoltage, undervoltage, overload, short circuit protection alarm, etc.

9.      Can be equipped with RS232/485 interfaces for remote remote signal, remote control; PC monitoring software can be measured real-time data, alarm information display, modify control parameters, read the 30-day maximum battery voltage, low battery voltage, photovoltaic power generation capacity per day cumulative and daily cumulative load power consumption and other historical data.

8.      Protection function: with battery overcharge, over discharge, output overload, short circuit, surge, solar cells reversed or short circuit, battery reversed at night, a series of anti-anti-charge alarm and protection functions.

6.      Users can set the batteries  over charging protection and over-discharge protection status of the load off.
 
7.      Each charging voltage detection with "bad back" control functions, to prevent switching into the oscillation condition.

5.      Historical data statistics:  over charging degree, over-discharge frequency degree,  overload degree, short circuit degree.

4.      Real-time display battery voltage, load current, the total photovoltaic current, Each photovoltaic  current, battery temperature, cumulative  photovoltaic  generation power (AH), cumulative load electro- (AH), etc. several parameters.

3.      Control circuit and main circuit fully isolated, high anti-jamming capability.

2.      LCD dot-matrix liquid crystal display modules, with English and Chinese operation menu, the user can switch select.

1.      Microcomputer chip control ,charge and discharge of each parameter point , the temperature equalize coefficient of programmable can be arbitrarily setted, can be adapted to the special requirements of different occasions.

product advantages

   This series product is adjusted and controlled for DC power souce from solar panel. The one hand,  sent the adjusted energy to the DC load, the other hand, send  the extra energy to the battery storage, when the DC power from solar panels can not meet the load required ,the battery-stored energy will be provided energy for the load. Battery is fully charged, the controller to control the batteries are not overcharge. When the battery power stored finished, the controller will control the battery is not over-discharge, to protect the battery.When the controller performance is not good, a great impact on battery life, and ultimately affect system reliability.

solar controller for DC power souce from solar panel.