solar working station

 0-10PA
5.Connect of expansion pot:insert expansion pot,avoid the system working at minus pressure.
6.Flow sensor:timely monitor medium flow of the whole system.
7.Exhaust setting:adopt print steel tube, it can release air cause of medium flow in the pipeline.According air quantity and frequency which cause of system, we can examine whether this system have leakage phenomenon.
8.Pipeline temperature display: medium temperature between right trip and return  trip,can be display at first time. Temperature probe is insert at a protection shield. Do not need to turn off any parts when replace it.
9.Medium inject:put handle whorl 90C. Medium can be injected in it.
10.Heat preservation material:EPS
11.Whorl:1/2 inch.

4.Pressure gauge: adopt hydraulic aseismatic manometer display system pressure scopes

3.WILO pump:this pump is a standard device in the system,we can choose any excel among three work scopes.

2.Global valve,check valve:brass material

Components of pipeline
1.Safety valve:make sure the system safety working

1.Externality size: 450mm*310mm*150mm
2.Max. self consumption: 3W
3.Accuracy of temperature measuring: 2C
4.Range of temperature measuring: 0~99CC
5.Power of controlled pump (temperature difference circulation pump, water-using end circulation pump): 600W
6.Electronical booster power: 3000W
7.Input signal: 3 temperature sensors (for top of tank, for heat collector, for bottomof tank)
8.Output signal: 3 (electronic booster, temperature difference circulation pump and water-using end circulation pump)
9.System working pressure: 0.6MPA

specification and its features

solar  working station (solar hot water controller)

solar hot water working station -1.Externality size: 450mm*310mm*150mm
2.Max. self consumption: 3W