Solar Battery PoE Power Charge Controller SBPN-1248-02R

Make sure the output voltage of the solar panel was regulated, otherwise will due to the output voltage on the P3 terminal of the prototype over 18V when the model without battery be connected. (mass production will be revised to be cut off the output when the voltage on P3 terminal over 18V).

2

Connect the battery to the P1 BAT terminal. Make sure the polarities are correctly connected. Sequentially connect the solar panel to SOL terminal and connect PoE source to P2 RJ45 lower jack. (If solar panel or PoE source is installed before the battery, and if the polarity of battery is reversed, then the fuse will be burnt.)

1

Description

Items

Installation Notice

270 x 160 x 45 (L x W x H) mm

White Box Dimension

T.B.D.

Weight and Volume without Power cord

20

Number of unit in one Carton

Package

                        Option for DIN Rail mounted

159 x 118 x 40 (L x W x H) mm

Plastic Case Dimension

Black

Plastic Case Color

Texture

Plastic Case Finish

PC

Plastic Case Material

Mechanical & Dimension

Feeding power(-)

-V dc

Feeding power(-)

-V dc

8

Feeding power(-)

-V dc

Feeding power(-)

-V dc

7

Data Transmit

Tx-

Data Transmit

Tx-

6

Feeding power(+)

-Vdc_return(+)

Feeding power(+)

-Vdc_return(+)

5

Feeding power(+)

-Vdc_return(+)

Feeding power(+)

-Vdc_return(+)

4

Data Transmit

Tx+

Data Transmit

Tx+

3

Data Receive

Rx-

Data Receive

Rx-

2

Data Receive

Rx+

Data Receive

Rx+

1

Description

Symbol

Description

Symbol

Pin

RJ-45 Output (Data & Power)

RJ-45 Input (Data & Power)

RJ-45 Connector and Pin-Out

Free air cooling

Cooling

5% ~ 90%

Operation Humidity

-40 ~ +85 ?C

Storage Temperature

-25~ +45 ?C

Operation Temperature

Recommended Operating Conditions

The LED lights on when the battery polarity is reversed.

Battery reverse indicator

REV

The LED lights on when the P3 output connector on rear panel is connecting to a device and offers power, the nominal output voltage is 13V ~ 15V.

Loading indicator

LOA

The LED lights on when battery is connected on BAT connector and charging.

Charging indicator

CHA

The LED lights on when SOL connector is connected to solar panel with input voltage over 12V.

Solar power input indicator

SOL

The LED lights on when P2 PoE connector lower jack with 18V ~ 57V input.

PoE power input indicator

POE

Description

Means

Symbol

Indicators

Battery output current limited: Fuse

PoE output short circuit protection

Output short circuit protection

Solar panel over charge protection

Solar panel polarity reversal protection

Battery over charge protection

Battery over discharge protection

Battery polarity reversal protection

Other Protections

Cut off the load when battery volt is lower than 11V

Solar Battery PoE Power Charge Controller
Support Solar Panel
Support Battery Charge
Support 48V PoE