solar charge controller/ solar charger 20A EPIP20-MT

Compliance:  CE

Dimension:  140x90.5mm

Weight: 250g

Temperature:  -35Cto +55C

Type of Charging:  series PWM

Terminals:   for wire sizes to 6 mm2

Electronic protections

Self-consumption:  6mA maximum

Low voltage Reconnect:   12.5 Volt 

Low voltage disconnect:  11.1 Volt

Regulation point:         14.4 Volt                               

EPIP20-MT:    12 V or 12/24 VOLT auto work, 20 AMPS

RATINGS:   12/24 VOLT auto-work

MODEL NO:   EPIP20-MT

4. or 5. or 6. or 7. Light is turned on for 2 hours(or 3 hrs, or 4 hrs, or 5 hrs)after sundown, turned off then, and turned on for 2 hours(or 3 hrs, or 4 hrs, or 5 hrs)before sunrise.

3.                     Test mode, lights on after it detects no light, lights off after it detects light.

2.                     Lights remain turned off, ON/OFF mode

1.                     Dusk-to-Dawn, light is on all light

0.                    12 hours light is turned on after sundown

0,1,2,3,4,5,6,7  Hours light is turned on after sundown

Digital LED display shows the 16 lighting options(by switch with 5 seconds )

EPIP20-MT solar PV charge controller is designed for solar DC lighting system.There are several optional working modes including Light ON + Light OFF control mode, Light ON +set time OFF delay mode, Test mode, and general mode.DC output mode and two time setting modes

This type of solar charge controller is for solar street light systems or solar PV systems, with dual timer function.