Solar Regulator

2. The rated current of the solar panels and the load must be less than the rated current of the con

1. Before connection, please check and confirm the rated voltage of the solar panels, batteries and the loads carefully. These must be same rated voltage, all 12V or all 24V.

Attention Items:

2. One piece of Load Indicator LED (mark: Load). When it is bright, there is an output and the load is working, No light means there isnt the output and the load stop working.

1. One piece of Charge Indicator LED (mark: Charge). When it is bright, the battery is charged by the solar panel strongly. Flickeringly means floating charge, no light means stop charging.

III Indicators:

and correctly.

of the controller ( the fifth one and the sixth one from the left) firmly

3, Connect the +, - Poles of the load to the relevant terminal

2, Connect the +, Poles of the solar panel to the relevant terminal of the controller (the first one and the second one) firmly and correctly.

1, Connect the +, Poles of battery to the relevant terminal of the controller (the third one and the fourth one from the left) firmly and correctly.

Opening the top cover of the controller, connect the wire with terminal according to the drawing on the top cover of Controller.

II Connection: 

3, Controller will shut down the lighting system according to the time setting or shut down the lighting system automatically after sunrise.

2, Controller will start up the lighting system in the evening automatically after sunset 15minutes.

1, Preventing battery from over charging, over discharging and Reverse-Current during nights.

I Function:

Fitting for the solar lighting system is automatically controlled below 60W (12V) or below 120W (24V) for both lighting and solar panel. It uses the newest patent products of ours.

Solar Charge Controller

Solar Regulator

5A 12/24V Solar Street Light Controller, time control function and light sensor function. CE approved, IP65, solar regulator.