Solar Charge Controller/ Regulator
Product Details
CE world Bank,ISo9000
Compliance
ABS
Case
IP22
Enclosure
100% non-condensing
Humidity
-35?to +55?/SPAN>
Temperature
250g
Weight:
for wire sizes to 2.5mm 2
Terminals
140x90.5mm
Dimension
6mA maximum
Self-consumption
All 3 LEDs blink-to show mistakes
Green-Yellow-Red battery levels
Red low voltage warning and disconnect
Green-Yellow-Red battery levels
Green charging
LED indications:
Terminals-corrosion protected
circuit board-conformal coated
Tropicalization:
Lightning-solar, load, battery
High voltage-load
Reverse current at night
Reverse polarity-solar,load & battery
short circuit and over current
Electronic protections:
6mA maximum
Self-consumption
series PWM 4 stages Bulk,PWM,Boost and Float
Type of Charging
-60
-30
Temp Comp . (mV/ Degree )
25.10 V
12.58V
Load reconnect
22.15 V
11.08V
Load disconnect
28.8 V
14.4 V
Regulation voltage
5 min.
1 min.
25% Current overload
5/10A
5/10A
Rated load
5/10A
5/10A
Rated solar input
24Volt
12Volt
parameter
TECHNICAL INFORMATION
solar charge controller :The SDPC_(2L) combines SDPC_(2L) design with two output terminals. SDPC_(2L) controller is designed with a microcontroller for automatic lighting control
functions.
THE TECHNOLOGY PROVIDES:
Proven reliability
Precise lighting control
PWM battery charging
FOUR VERSIONS AVAILABLE:
12 Volt: 5 and 10 amp ratings
24 Volt: 5 and 10 amp ratings
OPERATIONS:
Digital LED display shows the 16 lighting options(by switch with 5 seconds )
Number display, from 0 to 7, DC output for load 1.
Number display, from 0. To 7. DC output for load 2.
Digital LED stop flash to confirm correct switch selection.
10 minutes delay to make sure its real dark.
The SDPCsolar charge controller design with two output terminals. SDPC controller is designed with PWM
- Maximum Current:20A
- Rated Voltage:12V
- Application:Solar System Controller
- Model Number:SDPC_(2L)
- Brand Name:yantai shanyou
- Place of Origin:Shandong China (Mainland)
- Country:
- telephone:
| Delivery Time: | ASAP |
| Package: | carton and box and so on |
| Supply Ability: | 5000 Piece/Pieces per Week |
| Minimum Order Quantity: | 500 Piece/Pieces |
| Payment Terms: | L/C,T/T |
| Port: | Qingdao ,Yantai |
| Maximum Current: | 20A |
| Rated Voltage: | 12V |
| Application: | Solar System Controller |
| Model Number: | SDPC_(2L) |
| Brand Name: | yantai shanyou |
| Place of Origin: | Shandong China (Mainland) |
Send inquiry / quota request to Solar Charge Controller/ Regulator
Relate products of Solar Charge Controller/ Regulator
1. The size of this control box refers to the following dimensions; 2. The control box contains a DC circuit breaker; 3. The incoming and outgoing lines are wired with standard aviation plugs. Features of KE300D-03-01 Solar inverter control pump Excellent cooling performance ...
Come From Shenzhen MICNO Electric Co., Ltd.
The Cosuper Inverter LPT2000 integrates the function of battery inverter, battery charger and automatic transfer switch into a single unit, which helps save space and simplify installation by reducing the amount of equipment and cables installed, making it suitable for use in ...
All series of iPandee MPPT solar charging controllers incorporate new design concepts, keep up with the development of science and technology, adapt to the needs of cutting-edge off-grid system applications, and adopt our own patented MPPT control algorithm technology, which ...
