Solar Charge Controller

This bypasses the 10 minute delay turn on.

Test mode:

 

The load is switched on and off as required. This is the Normal Mode.

The controller can also work without delayed switching .

 

Common Controller Mode:

 

Successful selection is set after 5 seconds when the digit stops flashing. Repeat process if required.

selected. 4  to 12 hour delays can be selected, in increments of 2 hours.

Ten minutes after darkness falls, the output switches on and remains on for the duration of the delay

An additional feature of this controller is a timed switched output.

 

 

This feature is designed and supplied for resistive loads only. (IE: incandescent lights) DO NOT USE ON CAPACITIVE OR INDUCTIVE LOADS.

The decimal point indicates that the output will be switched on and off at a 1 hz rate.

 

0  1  2  3  4  5  6  7  0.  1.  2.  3.  4.  5.  6. 7.

 

again. On the second time through zero,  the decimal point will stay lit. ie

Each press of the button, will now increment the displayed number  from 0 up to 7 and then back to 0

To enter this mode, press and hold the on/off button ( 5 seconds) until the number on the LED screen begins to flash.

 

Mode Setup:  (battery must be connected.)

 Solar Charge Controller

Solar controller controller is designed for solar home system, SDCC Controller is ideal for rural electrification system

  • Maximum Current:20A
  • Rated Voltage:12V
  • Application:Solar System Controller
  • Model Number:SDCC
  • Brand Name:Yantai Shanyou
  • Place of Origin:Shandong China (Mainland)
  • Country:
  • telephone:
Delivery Time: ASAP
Package: carton and box and so on
Supply Ability: 5000 Piece/Pieces per Week
Minimum Order Quantity: 500 Piece/Pieces
Payment Terms: L/C,T/T
Port: Qingdao ,Yantai
Maximum Current: 20A
Rated Voltage: 12V
Application: Solar System Controller
Model Number: SDCC
Brand Name: Yantai Shanyou
Place of Origin: Shandong China (Mainland)
*Your name:
*Your Email:
*To:
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

KE300D-03-01 Solar Pump Inverter Control Box

1. The size of this control box refers to the following dimensions; 2. The control box contains a DC circuit breaker; 3. The incoming and outgoing lines are wired with standard aviation plugs. Features of KE300D-03-01 Solar inverter control pump Excellent cooling performance ...

Come From Shenzhen MICNO Electric Co., Ltd.

2000W SOLAR INVERTER WITH BATTERY CHARGE

The Cosuper Inverter LPT2000 integrates the function of battery inverter, battery charger and automatic transfer switch into a single unit, which helps save space and simplify installation by reducing the amount of equipment and cables installed, making it suitable for use in ...

Come From Suzhou Cosuper Energy Technology Co., Ltd

MPPT Solar Charge Controllers

All series of iPandee MPPT solar charging controllers incorporate new design concepts, keep up with the development of science and technology, adapt to the needs of cutting-edge off-grid system applications, and adopt our own patented MPPT control algorithm technology, which ...

Come From Shenzhen Ipandee New Energy Technology Co., Ltd.