Solar Charge Controller

This bypasses the 10 minute delay turn on.

Test mode:

The load is switched on and off as required. This is the Normal Mode.

The controller can also work without delayed switching .

Common Controller Mode:

Successful selection is set after 5 seconds when the digit stops flashing. Repeat process if required.

selected. 4  to 12 hour delays can be selected, in increments of 2 hours.

Ten minutes after darkness falls, the output switches on and remains on for the duration of the delay

An additional feature of this controller is a timed switched output.

This feature is designed and supplied for resistive loads only. (IE: incandescent lights) DO NOT USE ON CAPACITIVE OR INDUCTIVE LOADS.

The decimal point indicates that the output will be switched on and off at a 1 hz rate.

0  1  2  3  4  5  6  7  0.  1.  2.  3.  4.  5.  6. 7.

again. On the second time through zero,  the decimal point will stay lit. ie

Each press of the button, will now increment the displayed number  from 0 up to 7 and then back to 0

To enter this mode, press and hold the on/off button ( 5 seconds) until the number on the LED screen begins to flash.

Solar Charge Controller (SDRC Series)  :

Solar Charge Controller (SDRC Series) is designed with a microcontroller for automatic lighting control functions.