solar charge controller

CE world Bank,ISo9000

Compliance

ABS

Case

IP22

Enclosure

100% non-condensing

Humidity

-35?to +55?/SPAN>

Temperature

250g

Weight:

for wire sizes to 2.5mm 2

Terminals

140x90.5mm

Dimension

6mA maximum

Self-consumption

All 3 LEDs blink-to show mistakes

Green-Yellow-Red battery levels

Red low voltage warning and disconnect

Green-Yellow-Red battery levels

Green charging

LED indications:

Terminals-corrosion protected

circuit board-conformal coated

Tropicalization:

Lightning-solar, load, battery      

High voltage-load  

Reverse current at night  

Reverse polarity-solar,load & battery

short circuit and over current

Electronic protections:

6mA maximum

Self-consumption

series PWM 4 stages   Bulk,PWM,Boost and Float

Type of Charging   

-60

-30

Temp Comp . (mV/ Degree )

25.10 V

12.58V

Load reconnect

22.15 V

11.08V

Load disconnect

28.8 V

14.4 V

Regulation voltage

5 min.

1 min.

25% Current overload

5/10A

5/10A

Rated load

5/10A

5/10A

Rated solar input

24Volt

12Volt

parameter

TECHNICAL INFORMATION

THE TECHNOLOGY PROVIDES:

Proven reliability
Precise lighting control
PWM battery charging

FOUR VERSIONS AVAILABLE:
12 Volt: 5 and 10 amp ratings
24 Volt: 5 and 10 amp ratings

OPERATIONS:
Digital LED display shows the 16 lighting options(by switch with 5 seconds )
Number display, from 0 to 7, DC output for load 1.
Number display, from 0. To 7. DC output for load 2.
Digital LED stop flash to confirm correct switch selection.
10 minutes delay to make sure its real dark.

The SDPC_(2L) combines SDPC_(2L) design with two output terminals. SDPC_(2L) controller is designed with a microcontroller f