CEROTEKT 1 Waterproofing Products

  1kg.,4kg, 15 kg. 125 kg
For water proofing 1 -2 kg/ m²

PACKAGES:

  6 months in dry and suitable storage conditions

STORAGE LIFE :

   For CEROTEKT 1 - mortar. 250 kg/m³

   As additive for cement 20 - 40 kg / m³

RATE FOR USE :

   A suitable layer should be made to protect CEROTEKT 1 against atmospheric conditions.

   Application tools should be moistened with water before use and at intervals during application and thoroughly cleaned with water use .

   To produce water-proofing low-shrink tough elastic mortar for special screeding, plastering and joint sealing use the following mix: 6kg cement+14kg CEROTEKT 1 + 80kg sand and add as much water to obtain the required workable consistency.

   To facilitate application, especially when sprayed, CEROTEKT 1 may be diluted with 10-20% water.

   Apply 2 or 3 coats of CEROTEKT 1 using brushes, rollers or sprayers .

   Apply a primer coat of CEROTEKT 1 diluted with water 1:2or 1:3 (according to porosity and dampness of the surface) and allow to dry for one or two hours before subsequent aplication.

   The surface should be property cleaned .

   Stir CEROTEKT 1 to a homogeneous liquid before use .

Cold Applied Water - Proofer And Protective Coating Bitumen Emulsion.