Filter cleaning is completed using pulse-jet technology. A solenoid and diaphragm valve aligned to each row of filters provides the pulse cleaning. The cleaning sequence starts at the top filter row and continues down through each row. Remove, inspect, or change the cartridges from outside the unit by removing the filter access cover and sliding the filters out.
1.1.2 Filter Cleaning
During normal operation dust-laden air enters the unit through the dirty air inlet, Airflow is directed downward through the collector and heavier particulate falls directly into the hopper. The cartridges remove fine particulate and clean filtered air passes through the cartridges too the clean-air chamber and discharges through the clean-air outlet.
Dust Collector Operation:
AR-CH dust collector applied to
collect suspended dust and particles,
whether it is for air pollution control
Delivery Time: | 30days |
Package: | Pallet or Wooden box |
Supply Ability: | 100000 Set/Sets per Year |
Minimum Order Quantity: | 1 Set/Sets |
Payment Terms: | L/C,T/T |
Brand Name: | AR |
Place of Origin: | Jiangsu China (Mainland) |
TYDM Pulse Dust Collector Introduction This dust collector is a high-efficiency dust removal and purification equipment. The pulse cleaning method is adopted, which has the advantages of good cleaning effect, high purification efficiency, large processing gas volume, long ...
Come From Henan Herm Machinery Co., Ltd.
TCHS load cell signal high speed collector is used to capture very short instantaneous force, the highest frequency can reach 3500 times per second, suitable for continuous force measurement, instant force measurement, impact force testing and other test occasions. 1. The load ...
Come From Anhui Tianguang Sensor Co.,Ltd
Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/(m2/g) Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/(mg/kg) ≤ ...