Steel Scrap Machine Shop Turnings

Any deviations from the general classification of Iron & Steel Scrap to be consummated by mutual agreement between Transmet Limited and the buyer.

    Deviations:

The combined residuals other than manganese and copper shall not exceed a total of 0,60 percent.

Manganese ............ 1,65 %

Molybdenum ..........  0,10 %

Chromium ............. 0,20 %

Nickel .................. 0,45 %

Copper ................. 0,40 %

Wherever the term "free of alloys" is used in the classification given herein, it shall mean that any alloyts in the steel are residual and have not been added for the purpose of making an alloy steel. Steel scrap shall be considered free of alloys when the residual alloying elements do not exceed the following percentages;

    Residual Alloys:

The inclusion in the shipment of this grade ron and steel scrap shall of a negligible amount of metallic material which exceeds to a minor extent the applicable size limitations, or which fails to a minor extent to meet the applicable requirements as to quality or kind of material, shall not change the classification of the shipment, provided it can be shown that the inclusion of such off-grade material is unavoidable in the customary preperation and handling of the grade involved.

    Off-grade material:

Unless otherwise is agreed in advance, we, TRANSMET provide a 3rd party showing any impurity mixture in our each and every scrap lot (), issued by one of our accredited interna-tional neutral independent inspection companies.

A tolerance of maximum 0.75 % impurities to be acceptable for any lot traded by Transmet Limited. 

Steel scrap shall be free of dirt, nonferrous metals, or foreign material of any kind, and excessive rust and corrosion. However the terms "free of dirt, nonferrous metals or foreign material of any kind" are not intended to preclude the accidential inclusion of the neglictable amounts where it can be shown that this amount is unavoidable in the customary preperation and handling of this steel grade.

    Impurities [Cleanness]:

Clean steel or wrought iron turnings, free of iron borings, nonferrous metals in free state, scale, or excessive oil. May not include badly rusted or corroded stock.

    General Description:

Scrap lots will be non-oily, non-burnt and not attacked by acids or rusted through Deposit of rust admitted.

 Machine Shop Turnings

Other Links in Our Site:

   |      |  

   |      |  

RELATED LINKS UNDER THIS PAGE

As per ISRI Code No. 219

Machine Shop Turnings