waste water management

Lubricating oil

V-belt

V-belt Cover

Motor Pulley

Blower Pulley

Common Base

Pressure Gauge

Safety Valve

Flexible Joint

Reverse Valve

Anchor Bolt

Discharge silencer

Suction Silencer (With Air Filter)

Standard Accessories

Motor Power: 0.75-300kw

Discharge Pressure:0.1-0.8kgf/cm²

Pressure: 9.8-78.4kpa

Outlet Diameter: 50-300mm

Air capacity: 0.8-180m³/min

Model: LZSR50-300B

Major specification of LZSR three lobes roots blower:

14. Widely used in many different fields, especially in gas transportation, waste water treatment, sewage treatment, air purifying, aquaculture, pneumatic transport, vacuum packing, combustion-supporting, pressure charging, foundry, mine, metallurgy, light industry, building materials, electric power, flour, shot blasting, oxygen generation, coal washing, etc.

13. Case Material: HT200, Impeller Material: QT500-7.

12. The blower rotor is precision machined in its full surface, and since it is balanced precisely, it is almost without any vibration.

11. Long life. The blower bearing what we used are all double-row and Self-aligning bearing.

10. Advanced technology and accessory, we introduced advanced blower manufacture technology from Japan and many of our accessories are imported, such as NSK Bearing, imported Gear, and Gates triangle belt and so on.

9. Reasonable oil seal structure for no oil leakage.

8. Low price: as we have our own produce line so the price of our blower is very competitive.

7. The transported air is clean and without any oil-dust, as the blower sealing structure is reasonable, oil can not enter the chassis, thus the air is very clean.

6. Our blower bearing is introduced from Japan. There are two lubrication styles: fat grease (below 0.6kgf/cm²), oil splash grease (0.7-0.9kgf/cm²), which makes the product quality more liable.

5. With high precise and hardness Synchronization gear, we not only extension blowers life, but also reduce its noise.

4. Low vibration. Although the rotor has been processed precisely, and are all in balancing condition, we still adopted the high precision balancing equipment to make it more balance. Therefore, the blowers are almost no vibration.

3. Stable performance. The blower rotor, casing, wall panels, shaft and other key components are all produced by the advanced digital-control processing equipment thus make the interchangeability of parts and components increased.

2. High volume and anti-heat efficiency, so it is energy-saving. The blower rotor adopted the advanced Composite curve, the meshing is more reasonable, and further increases the volume efficiency.

1. Low noise, due to the helical suction and discharge, the blower air flow in and out according to the direction of spiral line, all these prevent the pulse noise and vibration. What's more, by using the Impedance complex muffler, the noise of our blowers are further reduced.

1.low noise
2.high efficiency
3.long life blower
4.make the output water clean without any oil-dust and ordor