One stop Waste Heat Recovery solutions equipment

Contact:
Dubai Office
16, street al-Nokhtha,
Jumeirah 3,
Dubai
UAE
 
P.O Box 34312 Dubai, UAE
 
+971505525039
 
Karachi Office
2-K, 13/4,
Nazimabad #2,
Karachi
+92-21-6621894

 
Works:
C174, Sector 31D,
P&T Society Korangi,
Karachi
+92-21-4253094
+92-333-3740076

If you want your cogeneration project to be simple and successful, talk to the one company that can provide comprehensive and cost-effective solutions.
 
Call ThermoTech Ingineering to discuss your application today!
 
Cogeneration applications
Hospitals
Textile
Hotels
Industrial /chemical plants
Manufacturing
Commercial facilities
Colleges and universities
Food processing
Health clubs
Swimming pools
District heating

Whether your facility is commercial, institutional or industrial, if it requires electrical and thermal energy, Thermo Tech Engineering can provide a comprehensive cogeneration solution that fits your needs. We have the knowldege, experience and relationships required to successfully implement cogeneration systems of all sizes, anywhere in the Pakistan. We can deliver an entire turnkey heat recovery plant. Or, we can handle specific parts of your project, such as sourcing the equipment of expertise you require. If you wish, TTE can act as a single point of contact, to streamline all design, specification and installation activities.
 
TTE makes more of the core cogeneration systems equipment than all other solution providers. In fact, we manufacture the entire heat recovery system and auxiliary equipment, that means you can count on power command performance and reliability when TTE designs and builds your cogeneration system.
 
Your one source for expertise and service

A cogeneration system may be feasible for your facility.
Many factors determine whether the installation of a cogeneration system is feasible.
First, there must be a simultaneous need for electric power and thermal energy.The thermal energy can be used for space or water heating, process heating, low-pressure steam production or cooling using an absorption chiller.
Second, your facility should have relatively constant electrical and thermal loads for most of the year.
Finally, the prospective site should have centralized equipment systems and an available source of fuel service.
If your facility meets all of these requirements, it may be a good candidate for cogeneration.
 
The final decision is often driven by economics, the so-called "spark spread" - the cost differential between electricity and natural gas. The greater the differential, the greater the potential cost savings - and the quicker the payback on your cogeneration investment.
Today, thanks to improvements in gas reciprocating engines, system controls and prepheral equipment facilities with combined electrical and thermal loads as small as 30 KW or up to 30 MW are excellent candidates.
 
TTE Provides complete congeneration solutions

TTE
ThermoTech Engineering
Waste Heat Recovery / Cogeneration / CHP
 
Waste heat recovery or cogeneration, also known as Combined Heat and Power (CHP) is the production of two kinds of energy - usually electricity and heat - from a single source of fuel. Cogeneration often replaces the traditional method of supplying multiple forms of energy such as purchasing electricity from the power grid and separately burning natural gas or oil in a furnace to produce heat or steam. While the traditional method of delivering energy is convenient, it is very inefficient and wastes up to two - thirds of the energy in the original fuel. Utility customers pay for those losses in their electrical rates - and always have. On-site cogeneration systems not only generate electricity more efficiently than central power stations, they capture and use most of the heat that is normally wasted. Depending on your application, the integration of power and heat production into one on-site cogeneration system can generate savings of up to 35% for total energy expenditures. And if you're a big energy user, these savings can go right to your profits.
THe principles of cogneration have long been known and put to use in a wide variety of applications. Today, advances in diesel, lean-burn gas reciprocating engine technology, micro turbines, heat exchangers and system controls, make cogeneration both practical and economical for applications as small as 30 kW.
 
A cogeneration system normally consists of a prime mover turning an alternator to produce electricity, and a waste recovery system to capture heat from the exhaust and cooling jacket water. The prime mover can be a diesel engine, a lean-burn gas reciprocating engine or a gas turbine. Nearly 90% of the energy in the original fuel is put to productive use.
Energy savings and payback - if energy for power, heating or cooling is a big component of your costs, your energy savingswill be proportionalyelly large. Savings can lead to a quick payback on CHP systems investments when combined with tax credits, excess energy sales and cogeneration gas discounts offered by some utilities.
 
Industry is moving towards cogeneration
 
Continuing changes in economics, technology and energy policies are combining to make cogeneration a smart, cost-effective choice.
High electric power rates
Major advances in lean-burn gas reciprocating engines
the most efficient and proven cogeneration technology
have made cogeneration systems viable for a wider range of applications.
 
Feasibility

Waste Heat Recovery, onsite cogeneration of heat and electricity simultaneously, cutting your energy costs more than half!