EES Water Jetting

• EES Products clean up to 8 times faster than the conventional chemistries.

• The volume of EES product required is typically one third of that normally used.

• EES products do not form emulsion wastes or rag layers.
• EES products can be recycled within the cleaning process.

• EES products flocculate the solids.

?        

Driven by industry KPIs related to reducing operating costs, increasing operating efficiency, reducing time and personnel required and waste minimisation the MicroEmulsions technology has been designed with both technical performance and environmental benefits in mind:-

All EES MicroEmulsion products supplied for offshore use are CEFAS / DTI Gold Rated and carry no flag for substitution warnings. Unlike many competing organic based products all EES products are fully soluble in water, are readily biodegradable, are non flammable and are non toxic and non corrosive providing the most environmentally sound solution possible. The Health & Safety risks associated with the use of these products are minimised.   

EES offers an extensive portfolio of specialist MicroEmulsion chemicals to enhance surface cleaning operations.

The transfer units can be supplied with prime movers to suit any hazardous area zoning restrictions that may apply.

EES offers the very latest in waste transfer technology.

Vacuum Transfer System

Ultra High Pressure Water Jetting Pumps / ancillary equipment is operated at 30,000 psi @ 20 Litres per minute.

The use of water to prepare steel surfaces ensures a guaranteed means of removing entrapped salts and achieves the original substrate profile.

Ultra High Pressure Surface Preparation is used for Internal / External applications and offers an Environmentally Friendly alternative to Grit Blasting.

Ultra High Pressure Water is used to prepare steel surfaces to international standard SA2.

EES offer Ultra High Pressure Water Jetting for Surface Preparation.

Ultra High Pressure Water Jetting Surface Preparation

High Pressure Water Jetting pumps can be supplied containerised, skid mounted or mobile truck mounted.

The principle operation of Retro-Jetting involves a rotating jet head attached to high-pressure hose, being fed into the pipe work in a controlled manner. The Jet head rotates and follows the contours of the pipe work, and depending on the configuration of the jets can self crawl along the pipe work cleaning as it goes. 

Retro-Jetting is a means whereby high pressure water is used to remove rust scale, debris, mud and concrete from the inside of pipe-lines and casings up to a maximum nominal bore size of 36.

EES offer High Pressure Water Jetting and Retro-Jetting for the internal cleaning / de-scaling of pipe-work.

EES offer High Pressure Water Jetting and Retro-Jetting for the internal cleaning / de-scaling of pipe-work.

Retro-Jetting is

try water jet    to get through more products