Crude Oil & Oil Products Waste Refining Technology

tel/fax: 0074957875294 Mr Globa (Moscow, Russia)

4.7. As additional terms of customer: cutting off the earth mound into the hole (by bulldozer). Quantity of missing cut to be added by trucks from a san-pit or other way for initial relief features reconstruction.

  c). Domestic and factory waste gathered from the surface and from the bottom of the object to be delivered to the waster receiving point after being refined. 

  b). In case of necessity the oil product waste under refinement is being separated from spring sources by means of bypass.

  a). Rolling out and cleaning of water-bearing oil product with simultaneous refinement of appearing polluted coast ground;

4.5.  The 2^nd stage of refinement operations:

  b). Rolling out and cleaning/refinement of the upper level.

  a). Tuning to the oil product waste behaviour.

4.4. The 1^st stage of refinement operations:

4.3. The process flowsheet tie-in to the object.

4.2. Detailed elaboration and concordance of Technical Program and Technical Conditions.

- ground polluted with black oil waste.

- water-bearing oil product;

- bottom sediment;

- oil product on the upper level;

  b). Sample splitting according to standard methods and laboratory investigations of samples:

  a). Detailed metering, compilation and making disposition plan of polluted areas on the territory.

4.1. Investigation of object.

4. Working plan.

 - less than 0,6 kg /sec with 170~ temperature and 8 bar pressure.

b). Steam power:

 - nominal 100 kW, maximum 150 kW/

a). Electric power:

3. Power consumption

With oil product/water density 0,92 input productivity makes 35 ³ per hour with water remainder less than 2%, and about 0,5

Refinement of oil waste at oilfields, refineries, depots by separating water, screenings and mechanical dirts; motor oil cleanin