Waste Treatment

Currently, the Carson location has 10 hazardous waste storage tanks with a total maximum permitted capacity of 92,492 gallons, as well as storage capacity for 90 drums. In keeping with Evergreen's dedication to the protection of the environment, the tanks and drums are completely enclosed within a 2-foot high by 8-inch thick berm to provide secondary containment capacity of 45,122 gallons.

The Carson facility's functions include the collection of used oil, waste antifreeze, oily water, and oil-contaminated solid waste from offsite generators such as automotive dealerships and repair locations, gas stations, and oil change shops. The collected waste is tested in compliance with environmental requirements, then consolidated and shipped to the appropriate permitted recycling, treatment, or disposal facility.

Evergreen's Southern California operations are based on a Transfer, Storage and Disposal hazardous waste facility located in Carson. The Carson facility is fully permitted by the Department of Toxic Substances Control (DTSC) as well as the South Coast Air Quality Management District (SCAQMD).


Carson TSF

Our facility operates four permitted drum storage and consolidation pads. These pads are permitted to accept 132 State and Federal waste codes with waste ranging from oily debris to flammable liquids. Evergreen can store up to 1008 drums at any one time. Our permit allows for consolidation of non-volatile solid waste, non-RCRA waste waters, oil and antifreeze, and small quantity packages of laboratory chemicals. Waste water and oil waste streams are transferred to our re-refinery and waste water treatment plant for processing. The dispositions of all other wastes are transported to only the most compliant off-site TSDF available to ensure the customers liabilities are managed to the best methods possible. All drummed waste accepted at our Newark facility, that is not processed in our plants, are manifested off-site with Evergreen being the generator of record.

Drummed Waste Storage and Consolidation

* Mechanical removal of solid content up to 65% by volume
* Lamella Clarifier
* Dissolved Air Flotation
* pH Adjustment and Precipitation
* Mixed Media filtration

Evergreen operates a newly built waste water treatment plant that can accept and treat up to 55.0 million gallons annually. The plant can accept any type of non-hazardous and non-RCRA waste water, and RCRA waters with low concentrations of organics. Oily water and sludge from clarifiers and sumps, R&D wash water, and RCRA water from contaminated properties can all be treated in our state-of-the-art treatment plant. Our plant utilizes the following processing methods:

Waste Water Treatment

The re-refinery is the only "true" recycling plant for used oil in the Western United States. The current operations re-refine 13.5 millions gallons of used oil annually. The plant can accept oil containing up to 10% water, less than 5 parts per million polychlorinated biphenyls, and 1,000 parts per million total organic halogens. Our facility does not accept any type of bunker oil for processing. Evergreen is currently completing a new "train" that will add an additional processing capacity of 10.0 millions gallons annually. The project is anticipated to be completed in December 2008.

Re-Refinery

All waste handling and treatment operations are supported by our in-house, full service, analytical laboratory that is permitted by the State of California Department of Health Services.

Evergreen owns and operates a full service, fully permitted RCRA Part B Hazardous Waste Treatment, Storage and Disposal facility. The facility has permitted operations that allow for used oil re-refining, waste water treatment, and drummed waste storage and consolidation.

Newark TSDF

  • Country:United States
  • telephone:1-510-795-4400
Evergreen owns and operates a full service, fully permitted RCRA Part B Hazardous Waste Treatment
*Your name:
*Your Email:
*To:EVERGREEN OIL, INC.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Treatment Pump

Treatment Pump Cosmetic treatment pumps are a kind of mechanical device with sealing function, releases a content in a predetermined form by pressing to generate a vacuum environment and has a sealing property. Products Description The working principle of Treatment Pump is ...

Come From ZHEJIANG B.I. INDUSTRIAL CO., LTD.

EDI PLANT WATER TREATMENT

EDI PLANT WATER TREATMENT EDI plant water treatment module is usually placed behind the reverse osmosis system, which not only overcomes the lack of deep desalination of reverse osmosis effluent, but also further removes trace carbon dioxide, residual salt, silicon dioxide, ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

CROSSFIRE® Carboxin 13%+Thiamethoxam 18%+Thiram 13% 44%FS Seed Treatment

Product Introduction Carboxine 13% + Thiamethoxam 18% + Thiram 13% 44%FS. Product Feature This product is an insecticide and bactericide composed of three active ingredients. Among them, Carboxin is a selective systemic fungicide that can penetrate plant lesions and kill germs. ...

Come From Chico Crop Science Co., Ltd.

LIQUID WASTE COLLECTION CONTAINER

Proper handling of laboratory waste collection can protect laboratory staff, facility staff (such as cleaners) and external parties from pollution risks. Volatile hazardous vapor of chemical waste discharged from laboratory instruments can easily contaminate laboratory ...

Come From Raykol Group(XiaMen)Corp.,Ltd.

Nonionic Flocculants for Industrial Wastewater Treatment

SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polyacrylamide polymers, in dry powder character. Our products have been specially designed for the industrial wastewater treatment process including paper, textile, and food industry and produced ...

Come From Beijing Sinofloc Chemical Co.,Ltd.

Medical Treatment

Jlymim provides basic surgical instruments, biopsy forceps, high frequency electric knife nickel and forceps, stapler, orthopedic surgical robot parts and other complex and precise parts for medical treatment. From customized selection of concept raw materials to manufacturing, ...

Come From KUNSHAN JINLONGYUAN NEW MATERIAL TECHNOLOGY CO.LTD

One-Step Extrusion Machine for Waste Fabric

One-step ffabric waste recycling machine is extrusion molding equipment together with waste plastics and auxiliaries to directly make trays, manhole covers, flower pots and other products. One-Step non woven fabric recycling machine Video Textile waste is a growing problem ...

Come From Anhui Guowang Eco Technology Ltd.,

WATER PRE-TREATMENT

Based on the quality of different raw water, we are committed to providing customers with customized solutions. Modular design is adopted, with reasonable and compact structure, beautiful appearance and convenient daily maintenance and operation. Equipped with double softeners, ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

MAGNESIUM WASTE & SCRAP

MAGNESIUM WASTE & SCRAP Long-term supply of pure quality magnesium scrap metal: magnesium alloy AZ91D, AM60B magnesium alloy, and AM50A magnesium alloy ingot. Recycling magnesium scrap metal is of great significance: it can greatly improve the benefit of enterprises, make full ...

Come From NanTong YiRui metal material Co.,Ltd

PLASTIC WASTE BIN MOULD

As an excellent injection mold maker in China, we produce wheeled dust bin mould from 80L to 660L, which meet the EN840 standard. Also, we product indoor waste bin mould in all kinds of sizes, structures and usages. Advantages of Jeward Waste Bin Moulds As an injection moulding ...

Come From JEWARD MOULD (HUANGYAN) CO., LTD.