Oil Test Kit For Traces Of Water Moisture

Field Test for Quantifying Water in Used Oil-Percent RangeOn-site test kit for quantifying water in used oil (waste oil) and other hydrocarbon matrixes. U. S. EPA SW-846 Draft Method 9001Hydro Scout is a field protable test that quantifies water concentraton in a variety of matices,  (oil, paint, solvents, liquid waste, soil, inks, etc.) . Hydro Scout can quantify water content in two ranges for used oil. 0 to 20% and 10 to 100% . It is an easy, inexpensive test that can be run in the field at the pickup point or in a laboratory setting with minimal training required. This mehtod is ideal for accurately determinining the true water content in used oil before acceptance or treatment. Hydro Scout has been assigned USEPA SW-846 Draft Method 9001. REAGENTS0 to 20% All of the reagents are premeasured and sealed in glass ampoules for safe, accurate and consistent results. Results are obtained in 2 minutes utilizing only a sampling syringe, one test tube and one breakable ampoule. Each test comes with a disposal ampoule that allows easy disposal of used tests in normal waste. The reagents are available in boxes of 40 tests or cases of 160 tests. 0 to 100% Testing the water content of oil from 10 to 100% requires one additional step using a premeasured dilution vial. Dilution vials are availble in separately packaged units of 12 vials per box. HYDRO SCOUT METERThe palm sized Hydro Scout meter is programmed to determine water content in used oil over two common ranges. "program A" covering the range 0 to 20% can determine water content down to 0. 15%  (1500 ppm) , V / V. Using the available dilution vials, "Program B"can measure water content up to 100% . Results are displayed in volume percent on a LCD. TIJIT PTE LTD holds stocks of this item.